Data Sheet

ManualsBrandsFinder ManualsElectromechanics67.22.9.012.4300 PCB relay 12 V DC 50 A 2 makers 1 pc(s)

67.22-4300 67.23-4300

2 NO (DPST-NO) 3 NO (3PST-NO)

≥ 3 ≥ 3

50/150 50/150

400/690 400/690

20,000 20,000

2,300 2,300

—7

50/4/1 50/4/1

1,000 (10/10) 1,000 (10/10)

AgSnO

5 - 6 - 8 - 12 - 24 - 48 - 60 - 110

1.7 1.7

(0.90 …1.1) U

(0.95…2.5) U

(0.32...0.65) U

0.17 0.17

0.05 U

1 · 10

30 · 10

25/5 25/5

–40...+70 (–40...+85) –40...+70 (–40...+85)

RTII RTII

Contact specification

Contact configuration

Contact gap mm

Rated current/Maximum peak current (for 5 ms) A

Rated voltage/Maximum switching voltage V AC

Rated load AC1/AC7a (per pole) VA

Rated load AC15 (per pole @ 230 V AC) VA

Single-phase motor rating (230 V AC) kW

Three-phase motor rating (480 V AC) kW

Breaking capacity DC1: 24/110/220 V A

Minimum switching load mW (V/mA)

Standard contact material

Coil specification

Nominal voltage (U

)V DC

Rated power W

Operating range (–40…+70°C) DC

Energy-saving mode (–40...+85)°C

Operating range for 1s

Holding voltage range DC

Minimum holding power W

Must drop-out voltage DC

Technical data

Mechanical life cycles

Electrical life at rated load AC7a cycles

Operate/release time ms

Ambient temperature range (energy-saving mode) °C

Environmental protection

Approvals (according to type)

Copper side view

• 2 NO

• Contact gap ≥ 3 mm

• PCB mount

Features

Printed circuit mount - 3 mm contact gap

50 A Power relay for photovoltaic inverters

• 2 and 3 pole versions

(NO, double break contacts)

• Contact gap ≥ 3 mm (according to

VDE 0126-1-1, EN 62109-1, EN 62109-2)

• DC coils, with only 170 mW holding power

• Reinforced insulation between coil and contacts

• 1.5 mm gap between PCB and relay base

• Suitable for use at ambient temperatures up to

85 °C (with energy-saving coil energization)

or 70 °C (with standard coil energization)

• Meets the EN 60335-1 requirements of

resistance to heat and fire (GWIT 775 °C and

GWFI 850 °C)

• 3 NO

• Contact gap ≥ 3 mm

• PCB mount

For outline drawing see page 6

II-2014, www.findernet.com

67 Series - Solar relay 50 A

SERIES

Summary of content (6 pages)

PAGE 1
67 Series - Solar relay 50 A Features 67.22-4300 67 SERIES 67.23-4300 Printed circuit mount - 3 mm contact gap 50 A Power relay for photovoltaic inverters 2 and 3 pole versions (NO, double break contacts) • Contact gap ≥ 3 mm (according to VDE 0126-1-1, EN 62109-1, EN 62109-2) • DC coils, with only 170 mW holding power • Reinforced insulation between coil and contacts • 1.
PAGE 2
67 SERIES 67 Series - Solar relay 50 A Features 67.23-4500 Printed circuit mount - 5.2 mm contact gap 50 A Power relay for photovoltaic inverters 2 and 3 pole versions (NO double break contacts) • Contact gap ≥ 5.2 mm (according to VDE 0126-1-1, EN 62109-1, EN 62109-2) • Suitable for inverters with DC input up to 1,500 V and AC output up to 690 V, installations up to 4,000 m above sea level • DC coils, with only 170 mW holding power • Reinforced insulation between coil and contacts • 1.
PAGE 3
67 SERIES 67 Series - Solar relay 50 A Ordering information Example: 67 series solar relay, single PCB terminals, 2 pole NO, ≥ 3 mm contact gap . 6 7 . 2 A B C D 3 . 9 . 0 1 2 . 4 3 0 0 Series A: Contact material 4 = Standard AgSnO2 Type 2= Single PCB terminals, 1.5 mm gap between PCB and relay base B: Contact circuit 3 = NO, ≥ 3 mm contact gap 5 = NO, ≥ 5.2 mm contact gap No.
PAGE 4
67 SERIES 67 Series - Solar relay 50 A Contact specification F 67 - Electrical life vs contact current (AC1/AC7a load) Cycles A H 67 - Maximum DC breaking capacity (67.xx-4500) DC breaking current (A) DC breaking current (A) H 67 - Maximum DC breaking capacity (67.xx-4300) DC voltage (V) When switching a resistive (DC1) or inductive (DC13) load having voltage and current values under the corresponding curve, an electrical life of > 30 000 cycles can be expected. II-2014, www.findernet.
PAGE 5
67 Series - Solar relay 50 A 67 SERIES Coil specifications DC coil data, 67.xx-4300 Nominal voltage UN V 5 6 8 12 24 48 60 110 Coil code Operating range (@ 70 °C max) Holding voltage 9.005 9.006 9.008 9.012 9.024 9.048 9.060 9.110 Umin V 4.5 5.4 7.2 10.8 21.6 43.2 54 99 Uh V 1.6 1.9 2.6 3.8 7.7 15.4 19.2 35.2 Umax V 5.5 6.6 8.8 13.2 26.4 52.8 66 121 A Resistance Rated coil consumption I at UN R IN Ω mA 14.7 340 21.5 279 37.6 213 85 141 340 71 1,355 35 2,120 28 7,120 15 DC coil data, 67.
PAGE 6
7 SERIES 67 Series - Solar relay 50 A Outline drawings Type 67.22 Type 67.23 II-2014, www.findernet.