Manualshelf

Data Sheet

ManualsBrandsFinder ManualsElectromechanicsThermistor Relay With Fault Memory 71.92.8.230.0001 Temperature monitoring with a PTC
12345678910
10
LED/LCD status announcement/advice
71 Series - Monitoring relays 10 A
Type Starting mode Normal operation Abnormal mode Reset
71.11.8.230.0010
71.11.8.230.1010
71.31.8.400.1010
71.31.8.400.1021
Memory OFF
71.31.8.400.1021
Memory ON
71.31.8.400.2000
71.41.8.230.1021
Memory OFF
71.41.8.230.1021
Memory ON
71.51.8.230.1021
Memory OFF
71.51.8.230.1021
Memory ON
71.91.x.xxx.0300
71.92.x.xxx.0001
Memory OFF
71.92.x.xxx.0001
Memory ON
Temperature to high
or PTC line break
or PTC short circuit
11-14 is open
Will close, if set point is OK
Measured value displayed
Normal operation
Set point is OK
11-14 is closed
After expiry of T
Set point is not OK
11-14 is open
Will close, if set point is OK
Time T runs
Set point is immaterial
11-14 is open
Will close after T, if set point
is OK
After connecting
T = 5 or 10 min
11-14 open
Normal operation
Set point is OK
11-14 is closed
Normal operation
Set point is OK
11-14 is closed
Normal operation
Set point is OK
11-14 is closed
Normal operation
Set point is OK
11-14 is closed
Temperature to high
or PTC line break
or PTC short circuit
11-14 is open
Will close, if set point is OK
Temperature to high
or PTC line break
or PTC short circuit
11-14 is open
Normal operation
Set point is OK
11-14 is closed
Normal operation
Set point is OK
11-14 is closed
Measured value displayed
Normal operation
Set point is OK
11-14 is closed
Measured value displayed
Normal operation
Set point is OK
11-14 is closed
Measured value displayed
Normal operation
Set point is OK
11-14 is closed
Measured value displayed
Time T2 runs,
Set point immaterial
11-14 is closed
Measured value displayed
Time T2 runs,
Set point immaterial
11-14 is closed
Measured value displayed
Time T runs,
Set point is not OK
11-14 is closed
Measured value displayed
Time T runs,
Set point is not OK
11-14 is closed
Measured value displayed
Time T runs,
Set point is not OK
11-14 is closed
Measured value displayed
Time T runs,
Set point is not OK
11-14 is closed
Measured value displayed
After expiry of T
Set point is not OK
11-14 is open
Will close, if set point is OK
Measured value displayed
After expiry of T
Set point is not OK
11-14 is open
Will close, if set point is OK
M in the display flashes
Measured value displayed
After expiry of T
Set point is not OK
11-14 is open
Will not close at RESET
M in the display flashes
Measured value displayed
After expiry of T
Set point is not OK
11-14 is open
Will not close at RESET
M in the display - static
Measured value displayed
After expiry of T
Set point is OK
11-14 is open
Will close at RESET
M in the display - static
Measured value displayed
After expiry of T
Set point is OK
11-14 is open
Will close at RESET
Normal operation
Set point is OK
11-14 is closed
Time T runs,
Set point is not OK
11-14 is closed
Time T runs,
Set point is not OK
11-14 is closed
Supply voltage to
A1(1) and / or
A2(5) is missing
11-14 is open,
Will close if supply voltage
restored and set point OK
Incorrect phase
rotation or phase
failure or voltage
A1(1) and/ot A2(5)
is > 1.11 U
N
11-14 is open
Will close, if set point is OK
Phase asymmetry
11-14 is open
Will close, if set point is OK
After expiry of T
Set point is not OK
11-14 is open
Will close, if set point is OK
After expiry of T
Set point is not OK
11-14 is open
Will not close at RESET
After expiry of T
Set point is OK
11-14 is open
Will close at RESET
Temperature is OK
11-14 is open
Will close at RESET
XI-2012, www.findernet.com