Data Sheet

ManualsBrandsFinder ManualsElectromechanicsSSR 5 A Switching voltage (max.): 240 V AC 1 pc(s)

Features

5 A modular SSR, 1 NO output

• 17.5 mm housing

• AC output (with back to back SCR)

• 5 kV (1.2/50 µs) insulation between Input and

Output

• Zero-crossing and random switch-on versions

available

• High switching speed

• High endurance

• Silent switching

• Spark and bounce-free switching

• Low control power

• 35 mm rail (EN 60715) mount

1 NO (SPST-NO) 1 NO (SPST-NO)

5 / 300 * 5 / 300 *

60…240 60…240

48…265 48…265

800 800

—0.37

1,000 800

800 400

1,000 800

500 250

100 100

0.85 / 1.5 0.85 / 1.5

24 110 … 240 24 110 … 240

12 … 24 — 12 … 24 —

0.6 / 0.5 3.6 / 0.3 0.6 / 0.5 3.6 / 0.3

16…32 90…265 16…32 90…265

9.8…32 — 9.8…32 —

2.4 24 2.4 24

10·10

20 / 12 9 / 8

–20...+70 ** –20...+70 **

IP20 IP20

Zero-crossing switch-on

Suggested applications:

• Lamp inrush current reduction (CFL - Compact

Fluorescent energy-saving Lamps and similar)

• Heater control

• Solenoid, contactor driver

Random switch-on

Suggested applications:

• Fine controls involving shorter time (specially

motor control)

• AC supply phase different from AC output phase

• 3-phase general purpose

Output specification

Output configuration

Rated current / Max. peak current (10 ms *) A

Rated switching voltage V AC (50/60 Hz)

Switching voltage range V AC (50/60 Hz)

Blocking (max. reverse repetitive) voltage V DC

Rated load AC7a (cos ϕ = 0.8) A

Rated load AC15 A

Single phase motor rating (230 V AC) kW

230 V lamps rating: incandescent W

compact fluorescent (CFL) W

electronic ballast fluorescent tubes W

electromagnetic ballast compensated fluorescent tubes W

Minimum switching current @ 230 V mA

Typical “OFF-state” leakage current @ 230 V mA

Max “ON-state” voltage drop @ 25 °C and 5A/100mA V

Input specification

Nominal voltage (U

) V AC (50/60 Hz)

V DC

Rated power VA (50 Hz)/W

Operating range V AC (50/60 Hz)

V DC

Must drop-out voltage V AC (50/60 Hz)/DC

Technical data

Electrical life cycles

Operate / release time ms

Insulation between input and output (1.2/50µs) kV

Ambient temperature °C

Protection category

Approvals (according to type)

77 Series - Modular Solid State Relay 5 A

77.01.x.xxx.8050 77.01.x.xxx.8051

77.01

Screw terminal

* see L77-3 diagram page 8

** see L77-1 and L77-2 diagrams page 7

For outline drawing see page 10

Simplified circuit diagram

IV-2013, www.findernet.com

SERIES

Summary of content (10 pages)

PAGE 1
77 SERIES 77 Series - Modular Solid State Relay 5 A Features 77.01.x.xxx.8050 77.01.x.xxx.8051 5 A modular SSR, 1 NO output 17.5 mm housing AC output (with back to back SCR) • 5 kV (1.
PAGE 2
77 SERIES 77 Series - Modular Solid State Relay 15 A Features 77.11.x.xxx.8250 77.11.x.xxx.8251 15 A modular SSR, 1 NO output 22.5 mm housing, heat-sink + plastic cover AC output (with triac) • 6 kV (1.
PAGE 3
77 SERIES 77 Series - Modular Solid State Relay 30 A Features 77.31.x.xxx.8050 77.31.x.xxx.8051 30 A modular SSR, 1 NO output 22.5 mm housing, heat-sink + plastic cover AC output (with back to back SCR) • 6 kV (1.
PAGE 4
77 SERIES 77 Series - Modular Solid State Relay 30 A Features 77.31.x.xxx.8070 77.31.x.xxx.8071 30 A modular SSR, 1 NO output 22.5 mm housing, heat-sink + plastic cover AC output (with back to back SCR) • 6 kV (1.
PAGE 5
77 SERIES 77 Series - Modular Solid State Relay Ordering information Example: 77 series modular SSR, 1 output 30 A AC, input voltage 230 V AC, relay style terminals arrangement, zero-crossing switch-on. A 7 7 . 3 1 . 8 . 2 3 0 . 8 B C D 0 5 0 Series D: Switch-on mode 0 = Zero-crossing 1 = Random Type/rated current 0= 5 A output (77.01) 1= 15 A output (77.11) 3= 30 A output (77.
PAGE 6
77 SERIES 77 Series - Modular Solid State Relay Input specification Led indication 77.01 Nominal voltage UN V 24 230 Input code 0.024 8.230 Operating range AC DC Umin V 16 90 Umax V 32 265 Umin V 9.8 — Umax V 32 — Must Input drop-out current voltage (AC/DC) IN at UN V mA 2.4 25 24 15 Umax V 32 — Must Input drop-out current voltage (AC/DC) IN at UN V mA 2 11 6 25 Umax V 32 — Must Input drop-out current voltage (AC/DC) IN at UN V mA 2 11 6 25 LED Supply voltage OFF ON 77.
PAGE 7
7 SERIES 77 Series - Modular Solid State Relay Output specification L77-1 Output RMS current vs. ambient temperature 77.01.0.024.805x @ 32 V DC L77-2 Output RMS current vs. ambient temperature 77.01.8.230.805x @ 265 V AC I - Modular SSR installed as a group (without gap) II - Modular SSR installed as a group (9 mm gap between each SSR) III - Modular SSR installed individually in free air (without a significant influence from nearby components) L77-4 Output RMS current vs. ambient temperature 77.31.x.
PAGE 8
77 SERIES 77 Series - Modular Solid State Relay Output specification L77-3 Inrush peak current (AC) vs. time capacity 77.01.x.xxx.80xx L77-5 Inrush peak current (AC) vs. time capacity 77.31.x.xxx.80xx 1 - “Cold” conditions (ambient temperature = 23 °C, no output current during the last 15 minutes) 2 - “Hot” conditions (ambient temperature = 50 °C, rated output current) L77-7 Inrush peak current (AC) vs. time capacity 77.11.x.xxx.82xx 30 30 15 15 Load 5 A 230 V (AC1) 1A (AC15) 0.
PAGE 9
77 SERIES 77 Series - Modular Solid State Relay Wiring diagrams Single-phase connection (77.01) Single-phase connection (77.11) Single-phase connection (77.31.....5x) LOAD Example of three-phase connection (with 3 x 77.01.8.230.8051) IV-2013, www.findernet.com Single-phase connection (77.31.....
PAGE 10
77 SERIES 77 Series - Modular Solid State Relay Outline drawings 77.01 Screw terminal 77.11/31 Screw terminal Accessories Adaptor for panel mounting, plastic, 17.5 mm wide for 77.01 only 020.01 Separator for panel mounting, plastic, 3 mm wide 020.03 Sheet of marker tags, plastic, 72 tags, 6x12 mm 060.72 020.01 020.03 IV-2013, www.findernet.com 060.