Modular Solid State Relay 5 - 15 - 30 - 50 A Drying kilns Heating and cooling Lighting control in corridors (for hotels, offices and hospitals) Bottling plant Labelling machines Packaging machines 77 SЕRIES
FINDER reserves the right to alter characteristics at any time without notice. FINDER assumes no liability for damage to persons or property, caused as a result of the incorrect use or application of its products.
77 SERIES Modular Solid State Relay 5 A 77 SERIES 77.01.x.xxx.8050 5 A modular SSR, 1 NO AC output • 17.5 mm housing • 60 to 240 V AC output (with back to back SCR) • 5 kV (1.2/50 µs) insulation between Input and 77.01.x.xxx.
77 SERIES 77 SERIES Modular Solid State Relay 7 - 15 A 77.01.9.024.9024 7 - 15 A modular SSR, 1 NO DC output • 17.5 mm housing • 2 versions, for 24 and 125 V DC mosfet output • 4 kV (1.2/50 µs) insulation between Input and 77.01.9.024.
77 SERIES Modular Solid State Relay 15 A 77 SERIES 77.11.x.xxx.8250 15 A modular SSR, 1 NO output • 22.5 mm housing, heat-sink + plastic cover • 24 to 277 V AC output (with triac) • 6 kV (1.2/50 µs) insulation between Input and 77.11.x.xxx.
77 SERIES 77 SERIES Modular Solid State Relay 30 A 77.31.x.xxx.8050 30 A modular SSR, 1 NO output • 22.5 mm housing, heat-sink + plastic cover • 60 to 440 V AC output (with back to back SCR) • 6 kV (1.2/50 µs) insulation between Input 77.31.x.xxx.
7 SERIES Modular Solid State Relay 30 A 77 SERIES 77.31.x.xxx.8070 30 A modular SSR, 1 NO output • 22.5 mm housing, heat-sink + plastic cover • 60 to 440 V AC output (with back to back SCR) • 6 kV (1.2/50 µs) insulation between Input and 77.31.x.xxx.
77 SERIES 77 SERIES Hockey puck Solid State Relay 25 - 40 - 50 A 77.25.x.xxx.
77 SERIES Hockey puck Solid State Relay 25 - 40 - 50 A 77 SERIES 77.25.x.xxx.
77 SERIES 77 SERIES Solid State Relay Ordering information Example: 77 series modular SSR, 1 output 30 A AC, input voltage 230 V AC, relay style terminals arrangement, zero-crossing switch-on. D B C D 1 . 8 . 2 3 0 . 8 0 5 0 Series Type/rated current 0 = 5/7/15 A output (77.01) 1 = 15 A output (77.11) 2 = 25 A output (77.25) 3 = 30 A output (77.31) 4 = 40 A output (77.45) 5 = 50 A output (77.55) No.
77 SERIES Solid State Relay 77 SERIES Input specification Led indication 77.01 Nominal voltage UN V 24 24 230 Input code 0.024 9.024 8.
77 SERIES 77 SERIES Solid State Relay Output specification L77-1 Output RMS current v ambient temperature 77.01.0.024.805x @ 32 V DC L77-2 Output RMS current v ambient temperature 77.01.8.230.805x @ 265 V AC 5 A I - Modular SSR installed as a group (without gap) II - Modular SSR installed as a group (9 mm gap between each SSR) III - Modular SSR installed individually in free air (without a significant influence from nearby components) L77-12 Output DC current v ambient temperature 77.01.9.
77 SERIES Solid State Relay 77 SERIES Output specification L77-10 Output RMS current v ambient temperature 77.25.x.xxx.8x50 60 L77-9 Output RMS current v ambient temperature 77.45.x.xxx.8x50 25 A 60 40 A 40 40 1 - Installation on 077.25 heat-sink (2 K/W) 2 - Installation individually in free-air 1 - Installation on 077.55 heat-sink (0.9 K/W) 2 - Installation individually in free-air D L77-8 Output RMS current v ambient temperature 77.55.x.xxx.8x50 60 50 A 40 X-2017, www.findernet.
77 SERIES 77 SERIES Solid State Relay Output specification Load 5 A 230 V (AC1) 5 A 24 V DC L/R = 20 ms 1 A (AC15) 0.5 A (AC15) 15 A 305 V cos ϕ = 0.8 15 A 305 V cos ϕ = 0.5 30 A 480 V cos ϕ = 0.8 30 A 480 V cos ϕ = 0.5 25 A 230 V cos ϕ = 0.7 40 A 230 V cos ϕ = 0.7 50 A 230 V cos ϕ = 0.7 D Critical rising voltage dv/dt without input control (gate open) @ Tj = 125 °C Max recommended switching frequency (Cycles/Hour, with 50% Duty-cycle) 77.01.8xxx 77.01.9xxx 77.11 77.31 77.
77 SERIES Solid State Relay 77 SERIES Wiring diagrams Single-phase connection (77.01.....802x) Single-phase connection DC (77.01.....9x2x) Single-phase connection (77.11) Single-phase connection (77.31....805x) D LOAD Single-phase connection (77.31....807x) Single-phase connection (77.x5) Example of three-phase connection (with 3 x 77.01) X-2017, www.findernet.com Note: t his connection can be used with all 77 series types.
77 SERIES 77 SERIES Solid State Relay Outline drawings 77.01 77.11/31 Screw terminal Screw terminal 77.01 DC 77.x5 Screw terminal Screw terminal (plate clamp) D Accessories Adaptor for panel mounting, plastic, 17.5 mm wide for 77.01 only 020.01 Separator for rail mounting, plastic, 9 mm wide 022.09 Sheet of marker tags (CEMBRE Thermal transfer printers) for all relays (48 tags), 6 x 12 mm 060.48 020.01 060.48 16 X-2017, www.findernet.com 022.
77 SERIES Solid State Relay 77 SERIES Accessories Heat-sink, anodized aluminium, 2 K/W, 65 x 100 mm, for 77.25 only 077.25 - Both the SSR and 35 mm rail clip mount to the heat-sink using M4 screws (supplied with heat-sink) - Before assembling to the heat-sink, it is necessary to apply a thin and even layer of thermal conductive paste (not supplied) to the lower metal surface of the SSR 077.25 D 077.25 with 77.25 Heat-sink, anodized aluminium, 0.9 K/W, 111 x 100 mm, for 77.45 and 77.55 077.
