Instructions / Assembly

5
2.1
2.2 2.3
2
F
D
F
A
ATTACHING THE RAIL
HORIZONTALLY
Use a measuring tape to mark
two points on the floor that are
of equal distance from the wall.
(Make sure floor is level)
2.1
Use a size 6 drill bit to drill holes
at the marked points on the floor.
2.2
Insert the wall anchors (A) into
the floor, using a hammer.
2.3
Place the rail (F) on the floor,
lining up the holes. Attach the rail
to the floor, using screws (D) and
the Allen key.