User's Manual

- 12 -
Memory
1) Touch Memory section to activate history data toggle display,
+ button and – button will be
flashing. Press – to toggle forward to see earlier weather history data together time stamp,
press + to see later history weather data. When history data displayed, the corresponding time
will be displayed at the time section area( History data saving interval can only be changed
using the PC software that comes with this product, the default history data saving time
interval is preset to 30 minutes prior to shipment).
2) Touch Memory section again will trigger the memory clear procedure: the word of “CLEAR”
will be flashing, the full memory usage icon will be flashing. Press and hold the memory full
icon for 3 seconds will clear the memory.
PC Connection
As an important feature in addition to the display on the Touch Screen, the Weather Station allows
the read-out of all measured and displayed time and weather data in form of complete history data
sets on a PC.
Data Storage
For a comprehensive weather history, the Base Station allows the internal storage of up to 4080 complete
sets of weather data with time and date. These data sets are being stored in non-volatile ring buffer memory
(EEPROM) and will not be lost even in case of an interruption of power supply (e. g. change of batteries).
In case the memory capacity of the Weather Station is exhausted the oldest data sets stored will be
overwritten by the new ones entered.
Data Recall
Certain weather data or setting values can only be read out, processed, and displayed by means of a PC.
Also the settings of the storing intervals from 5 minutes to 250 minutes for the storage of data sets can only
be performed by means of a PC.
Connections and Software
The wiring between Weather Station and PC takes place by means of an included USB cable. The
EasyWeather software package, also included in the shipping contents, must be installed on the PC.
This software allows the display of all present weather data with graphic symbols. It also allows the display,
storage, and printing of history data sets, whose volume exceeding the maximum 4080 data sets of the
Weather Station is only limited by the capacity of the PC’s main memory.
PC software installation
The installation of WH1080PC software is very simple: double click the setup.exe file and follow the steps
popped up.
Make sure you are running the program under the administrator accounts of your windows PC platform.
Otherwise the graphic function might not be working when graph display mode is needed to display all history
data.
If you run the program for the first time, the current weather display will be displayed and at the sub line of the
window, the program will show related information regarding the read of all history data into the PC. Please
note however, when there is large amount of data is being uploaded, it will take a few minutes time before the
system can respond to your setup settings. Otherwise it will display “read weather data fail” error message
since the USB port is reading the data from the memory and the system is not able to respond any further job
tasks.