User's Manual

- 6 -
Program Mode
The base station has five keys for easy operation: SET key, + key, HISTORY key, ALARM key,
MIN/MAX key
Note:
When setting certain units in the manual setting mode, hold the + or MIN/MAX key for 2s will
increase/decrease digits in greater steps.
The setting procedure can be exited at any time by either pressing the HISTORY key or waiting for the
30-second time-out to take effect.
Quick Display Mode
- While in normal display, Press the SET key to enter the Quick Display Mode as follow:
y Wind speed / Gust speed (press the + key or MIN/MAX key shifts the display between the wind
speed and gust speed)
y 1 hour / 24 hour / week / month / total rainfall quantity (press the + key or MIN/MAX key shifts the
display between the selectable rainfall quantities), while display the rainfall total quantity, pressing
the SET key for 2 seconds will reset the rainfall total value to zero.
y Outdoor Temperature / Wind chill / Dew point (press the + key or MIN/MAX key shifts the display
between outdoor temperature, wind chill and dew point)
Press the SET key to accept the change and advance to the next display mode. Continue to press the
SET key to toggle through the display mode until return to the normal Mode
Setting Mode
- Press the SET key for 2 second while in normal mode to enter the Setting mode, LCD contrast digits
will start flashing. You can skip over any setting by press the SET key. Press + key or MIN/MAX key to
select the units or scrolls the value. Holding the + key or MIN/MAX key for 2 second will
increase/decrease digits in great steps. To exit the Setting mode at any time, press the HISTORY key.
y Time Zone Setting (-12Æ12)
Note: At Europe, 0 for GMT+1 time zone, 1 for GMT+2 time zone, -1 for GMT time zone. At America,
-4 for Atlantic Time zone, -5 for Eastern Time zone, -6 for Central Time zone, -7 for Mountain Time
zone, -8 for Pacific time zone, -9 for Alaska time zone, -10 for Hawaii time zone.
y 12/24h time display select.
y Manual time setting (hours/minutes)
y Select DD-MM or MM-DD format.
y Calendar setting(year /month/ date)
y Wind speed and gust display units in km/h, m/s, bft, mph, knots
y Wind direction
y Rainfall display units in mm or inch
y Temperature display unit degree Celsius or Fahrenheit
Calibration Mode
- Press the HISTORY key for 8 second while in normal mode to enter the Calibration Mode, and the
wind factor digits will start flashing. You can skip over any setting by press the SET key. Press + key
or MIN/MAX key to select the units or scrolls the value. Holding the + key or MIN/MAX key for 2
second will increase/decrease digits in great steps. To exit the Calibration mode at any time, press
the HISTORY key.