User's Manual

Receiver model: WH2642
Sensor model: WH22B
Version 1.0 Page 19
Figure 19
Select the ObseverIP module on your network as shown in Figure 19 (the field will be highlighted)
and select the Open button (or double click this field) to view the ObserverIP module’s webpage
within your browser. Alternately, you can type the IP address in your web browser address bar
(example, Figure 18):
Figure 20
You are now communicating directly to the ObserverIP and can proceed to Section 3.9.
3.9.3 Linux Users
If you use an Apple or Linux operating system, download any commercially available IP scan tool,
such as AngryIP Scanner and find the MAC address of the ObserverIP. The MAC address is a unique
identifier for internet enabled devices.
The MAC address will be printed on the bottom of the ObseverIP receiver. An example MAC address
is 00:0E:C6:00:00:19.
Figure 21 shows typical scan results. Locate the IP address of the ObserverIP by cross referencing the
Mac address. In the example below, the IP address is 192.168.0.105.
Figure 21
Type the IP address you located from the IP Scan Tool into your web browser (example, Figure 22):
Figure 22
You are now communicating directly to the ObserverIP and can proceed to Section 3.9.