User's Manual

Receiver model: WH2642
Sensor model: WH22B
Version 1.0 Page 32
will insure the upgrade process will not be interrupted.
3. Launch the IP Tools application as referenced in Section 3.9, and locate the ObserverIP on
your network. Reference Figure 31. Select the Upgrade button to begin the firmware upgrade.
As shown in this figure, the IP address of the ObserverIP is 192.168.0.7. Make a note of your
IP address (your results will vary).
Figure 31
4. Reference Figure 32. Select the Select File button, and browse to the location of the file you
downloaded in Step 1.
Figure 32
5. Select the Upgrade Firmware button. Reference Figure 33. The dialog box will display
Received a Read Request from the ObserverIP module. A green progress bar will provide
you with the upgrade status.
DO NOT OPERATE THE MOUSE OR KEYBOARD WHEN UPGRADING to prevent
interruption of the upgrade.