User's Manual

*Note: “DST OFF” indicates that the feature is off and the WWVB will not change times automatically.
“DST ON” indicates that the feature is on and the WWVB will change times automatically. Some locations
(Arizona and parts of Indiana) do not follow Daylight Saving Time, and should select “DST OFF”.
Troubleshooting
No signal from remote sensor
There can be many reasons for this, the following steps should help you troubleshoot this problem.
z Make sure that the batteries in the remote sensor are not depleted.
z Reduce the distance between transmitter and receiver
z Remove the batteries from the base station and the remote sensor and reset the weather station in
the right order as described in section 2 of this manual.
z This problem could also be a result of radio interference in your neighborhood, try relocating the
sensor and the base station
Remote sensor drops off intermittently
Possible interference from other sources, try relocating the sensor or the base station. Radio device
operation on the same frequency can also cause interference.
Temperature is incorrect.
Check/ Replace the batteries. Also make sure that the base station is not place near objects that can
act as sources of heat or cold.
Specifications
Outdoor data
Transmission distance in open field: . . . . . . . . . . . .. . . . . 300feet(100m) max.
Frequency: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433.9
2MHz
Measuring interval remote sensor:. . . . . . . . . . . . . . . . . 48 sec
Water proof level:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IPX3
Current:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 15mA (HF transmitting), 10uA (Standby)
Indoor data
Indoor temperature range:. . . . . . . . . . . . . . . .. . . .. . . . -15.8℉ to 140℉ (-9.9℃ to +60℃)
Resolution :. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.2℉ / 0.1℃
Power consumption
Base station :. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2XAA 1.5V LR6 Alkaline batteries
Remote sensor:. . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 2xAAA 1.5V LR03 Alkaline batteries
Battery life :. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Minimum 12 months for both sensor and receiver
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.