User Manual

Version 1.0 Page 11
6.2.1 Button Operation
Figure 12
The console has 8 buttons at the bottom for easy operation:
Key
Description
SET
Press and hold to enter the SET mode.
TEMP.
 Press to switch between Outdoor Temperature, Wind Chill, Heat
Index, Dew Point.
 To bypass RF reception, press and hold while powering up the
console (connecting the AC adapter with batteries removed).
RAIN
Press to switch between Rain Rate (in/hr), Rain Event, Rain Day, Rain
Week, Rain Month, and Rain Total.
WIND +
 Press to switch between average wind speed, wind gust and wind
direction.
 While in SET mode, press to increase the value. Press and hold
for two seconds to increase the value rapidly.
PRESSURE -
 Press to switch between Relative Pressure (current), and 12hr,
24hr, 48hr and 72hr average Relative Pressure.
 While in SET mode, press to decrease the value. Press and hold
for two seconds to decrease the value rapidly.
ALARM
Press to switch between high and low alarms
MAX/MIN
Press to switch between minimum and maximum values.
LIGHT/SNOOZE
 Press to adjust the LCD backlight brightness (high, medium and
off).
 Press to exit the SET mode at any time.
6.3 Set Mode
Press and hold the SET button for two seconds to enter the SET Mode. To proceed to the next setting,