User Manual

Version 1.0 Page 13
Command
Mode
Settings
Image
[SET] + 2
seconds
Enter Set
Mode, Beep
On or Off
Press [WIND +] to switch OFF and
ON.
This will prevent the beep from
sounding when pressing any button.
[SET]
Clear Max/Min
Press [WIND +] to switch OFF and
ON.
When set to ON, the minimum and
maximum values reset every day at
midnight (00:00).
When set to OFF, the minimum and
maximum values must be reset
manually.
[SET]
Daylight
Savings Time
(DST)
Press [WIND +] to switch DST OFF
and ON.
Set to ON (most locations) if you
observe daylight savings time, and the
clock will automatically adjust twice
per year.
Set to OFF (Arizona and Hawaii) if
you do not observe DST.
[SET]
Time Zone
Press [WIND +] or [PRESSURE -] to
adjust up or down (-12 to 12).
The default time zone is -5 (EST).
To find your time zone settings, please
reference Figure 14.
[SET]
12 hour / 24
Hour Format
Press [WIND +] to switch hour format
between 12 hour and 24 hour format.
[SET]
Hour
Press [WIND +] or [PRESSURE -] to
adjust hour up or down.
[SET]
Minute
Press [WIND +] or [PRESSURE -] to
adjust minute up or down.
[SET]
Date Format
Press [WIND +] to switch between
MM-DD (month-day) and DD-MM
(day-month)
[SET]
Year
Press [WIND +] or [PRESSURE -] to
adjust year up or down
[SET]
Month
Press [WIND +] or [PRESSURE -] to
adjust month up or down
[SET]
Day
Press [WIND +] or [PRESSURE -] to
adjust day up or down
[SET]
Pressure Units
of Measure
Press [WIND +] to change units of
measure between hpa, mmHg or inHg.