User Manual

Version 1.0 Page 5

5.3.1 Install Wind Vane

Reference Figure 2. (a) Locate and align the flat key on the wind vane shaft to the flat key on the wind

vane and push the vane on to the shaft. (b) tighten the set screw with a precision screw driver and

make sure the wind vane spins freely.

(a)

(b)

Figure 2

5.3.2 Install Wind Cups

Reference Figure 3. (a) push the wind cups on to the shaft. (b) tighten the set screw with a precision

screw driver and make sure the wind cups spin freely.

(a)

(b)

Figure 3

5.3.3 Install the Rain Gauge Funnel

Reference Figure 4. Install the rain gauge funnel. Rotate clockwise to attach the funnel to the sensor

array.