Owner manual

11
WALL
4 feet / 1.2 meter
(recommended)
1
Screws
Back Steel
Plate
2
3
Silver
Nut
Steel
Bar
Allen Key
Screw
Wooden Doorframe
1
2
2
UNDERSTANDING ADAPTEC PLUS INSTALLATION FOR
• Wooden Door or Glass Door
The diagrams below only highlights the use of an EM lock during installa-
tion. You may opt to use a dropbolt/deadbolt/door strike instead. Please
consult a qualifi ed technician/installer before proceeding with the instal-
lation.
1
To install FingerTec AC900/R2 on a wall, drill 5 holes as shown. 4 small holes are
for the screws and the bigger hole is for the network cable.
2
Tighten the 4 screws to fix the Back Steel Plate on the wall.
3
Install the keyswitch as per instructions given in the box. The keyswitch is an
override key in case of a system failure or breakdown.
Wooden Door
1
Drill 3 holes on the wooden
door.
2
Place the Steel Bar on the
door. Insert the Silver Nut
on one side and the Allen
Key Screw on the other
side. Tighten the screw to
lock the Steel Bar onto its
position.