Owner's manual

C H A P T E R

CONTENTS

USB PEN DRIVE MANAGEMENT AND

INSTANT MESSAGES DISPLAY (SMS)

USB Pen Drive Management

You can use USB pen drive to download or upload users and download clocking data from

terminals. Downloaded data will be copied into the software for further analysis.

Before you start using this function, you must do the followings:

[1] Select Type of Connection USB in Terminal Setting page. The sample is shown below.

[2] Make sure the ID assigned is the same as Dev ID in the terminal.

[3] Activate the product key and activation in the software.

Missing any of the above information will result in no data being displayed when you try to

read data from the USB pen drive.

DOWNLOAD USERS FROM USB PEN DRIVE

Plug a USB pen drive to a terminal to download user information (user ID, fingerprint, pass-

word, card ID etc). The information can be copied and saved in the software. To download

users from terminal, follow the steps below.

Step 1: Click to open USB Pen Drive Management.

Step 2: Select “Read user info from USB disk downloaded from remote terminal”. Click

“Next” to continue.