Datasheet

RB-Ftr-09
6V, 270RPM, 18.34 oz-in 34:1 Spur Gear Motor
These are what your robots have been waiting for. Our custom engineered robot drive motors are
designed to handle the rigor of combat without breaking, and they won't hurt your wallet either!
• The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.
• Having the same face mount pattern as the now-obsolete BaneBots 16mm gearmotors means they can
be a direct drop-in replacement for all your combat-worn BaneBots motors.
• Spur gear reduction motor with mabuchi FK-050 motor.
• 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1
• At only 28grams (0.99oz), these are a lightweight and still powerful motor.
These motors make is super simple to get a robot moving! Just pick up a pair of Lite Flite wheels
and Lite Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to be driven
by radio control! For mounting the motors, use these 2-56 screws. We now also carry 3mm
bearings for supporting the shaft in heavy robots or weapon systems.
Motor (Mabuchi FK-050SH-13125) Specifications
- Operating Voltage: 4.5V - 22.2V (>7.4V decreases motor life)
- Nominal Voltage: 6Vdc
- No Load RPM: 11530rpm
- No Load Current: 0.05A
- Stall Current: 1.3A
- Stall Torque: 0.0461kg-cm (0.64oz-in)
- Kt: 0.0352kg-cm/A (0.49oz-in/A)
- Kv: 1573rpm/V
- Efficiency: 52%
- RPM @ Peak Eff: 9100
- Current @ Peak Eff: 0.34A
Physical Specifications
- Gearbox Length: 11.6mm (0.455in)
- Total Length: 40.3mm (1.59in)
- Gearbox Diameter: 15.5mm (0.61in)
- Shaft Diameter: 3mm (0.12in) with flat along length
- Shaft Length: 38mm (1.5in)
- Mounting Holes (2): #2-56 spaced 11mm (0.433in) apart
-do not use screws that protrude more than 4mm (0.156in) into gearbox
- Weight: 28grams (0.99oz)