Datasheet

ManualsBrandsFinisar ManualsNetworkingFRXD02SL1C

F i n i s a r

 Finisar Corporation – 26-August-2011 Rev A4 –

Finisar Confidential

Page 1

Product Specification

SNAP12 Parallel Transmitter and Receiver Modules

Commercial Temperature

FTXD02SL1C / FRXD02SL1C

PRODUCT FEATURES

• 12-channel transmitter and receiver

modules

• SNAP12 form factor

• Multirate capability: 1Gb/s to

2.7Gb/s per channel

• Maximum link length of 600m at

2.5Gb/s on OM3 Multimode Fiber

(MMF)

• Unretimed electrical interface

• 3.3V power supply required

• Reliable VCSEL array technology

• Commercial operating case

temperature range of -5ºC to 75ºC

• MPO type connector

• RoHS-6 compliant (lead-free)

Product Photo

APPLICATIONS

• Interchassis connections

Finisar’s SNAP12 transmitter and receiver modules are designed to be used in links of up

to 32 Gigabit per second over multimode fiber. They are RoHS-6 compliant and lead-

free per Directive 2002/95/EC

, and Finisar Application Note AN-2038

PRODUCT SELECTION

Part Number Description

FTXD02SL1C 12-channel SNAP12 transmitter module, commercial temperature

FRXD02SL1C 12-channel SNAP12 receiver module, commercial temperature

Summary of content (8 pages)

PAGE 1
Finisar Product Specification SNAP12 Parallel Transmitter and Receiver Modules Commercial Temperature FTXD02SL1C / FRXD02SL1C PRODUCT FEATURES • 12-channel transmitter and receiver modules • SNAP12 form factor • Multirate capability: 1Gb/s to 2.7Gb/s per channel • Maximum link length of 600m at 2.5Gb/s on OM3 Multimode Fiber (MMF) • Unretimed electrical interface • 3.
PAGE 2
Finisar SNAP12 Modules Product Specification – August 2011 I.
PAGE 3
Finisar SNAP12 Modules Product Specification – August 2011 II.
PAGE 4
Finisar SNAP12 Modules Product Specification – August 2011 III. Absolute Maximum Ratings The following table represents the absolute maximum ratings for the SNAP12 transmitter and receiver modules. Absolute maximum is defined as the maximum point of exertion without permanent damage to the SNAP12 modules. Parameter Storage case temperature range Symbol TS Min -40 Max 85 Unit o C Ref.
PAGE 5
Finisar SNAP12 Modules Product Specification – August 2011 VI. Control and Status Signal Level Specification Parameter Input voltage - logic LOW Min -50 Input voltage - logic HIGH 2000 Typ Input current Max 800 Unit mV Vcc mV 125 µA Output voltage - logic LOW GND 400 mV Output voltage - logic HIGH 2400 VCC mV 10 µA Output current high resistance VII. Trasmitter Module Performance (TOP = -5 to 75°°C, VCC = 3.
PAGE 6
Finisar SNAP12 Modules Product Specification – August 2011 VIII. Receiver Module Performance (TOP = -5 to 75°°C, VCC33 = 3.3 ± 5% Volts) The following characteristics are defined over the Recommended Operating Conditions of -5°C to +75°C case temperature and Vcc = 3.3V ±5%. Typical values are defined at a case temperature of 40˚C, Vcc = 3.3V, bit rate of 2.
PAGE 7
Finisar SNAP12 Modules Product Specification – August 2011 XI.
PAGE 8
Finisar SNAP12 Modules Product Specification – August 2011 XII. References 1. Directive 2002/95/EC of the European Council Parliament and of the Council, “on the restriction of the use of certain hazardous substances in electrical and electronic equipment”. January 27, 2003. 2. “Application Note AN-2038: Finisar Implementation Of RoHS Compliant Transceivers”, Finisar Corporation, January 21, 2005. XIII. For More Information Finisar Corporation 1389 Moffett Park Drive Sunnyvale, CA 94089-1133 Tel.