Datasheet

ManualsBrandsFinisar ManualsNetworkingFTL-1319-3D-2.5

Finisar

Product Specification

RoHS Compliant Long-Wavelength GBIC Transceiver

FTL-1319-3D-2.5

Product Features

• Up to 2.5Gb/s bi-directional

data links

• 1310nm Fabry-Perot laser

transmitter

• Optional Digital Diagnostics

• Extended operating temperature

range (-10°C to +85°C)

• Compatible with 3.3 & 5V

systems

• Hot-pluggable (complies with

GBIC specification Rev. 5.5)

• Fully metallic enclosure for low

EMI

• Low power dissipation

• RoHS compliant and Lead Free

Applications

• 1.25Gb/s 1000BASE-LX

Ethernet

• 1.06 and 2.125 Gb/s Fibre

Channel

Finisar’s FTL-1319-3D-2.5 1310nm GBIC transceivers comply with GBIC Specification

Revision 5.5

in all respects expect where deviations are required to accommodate the

higher bit rate. They are compatible with Gigabit Ethernet as specified in IEEE 802.3

Fibre Channel FC-PH, PH2, PH3

and FC-PI-2 Rev 10.0

. They are RoHS compliant and

lead free per Directive 2002/95/EC

and Finisar Application Note AN-2038

Summary of content (9 pages)

PAGE 1
Finisar Product Specification RoHS Compliant Long-Wavelength GBIC Transceiver FTL-1319-3D-2.5 Product Features • Up to 2.5Gb/s bi-directional data links • 1310nm Fabry-Perot laser transmitter • Optional Digital Diagnostics • Extended operating temperature range (-10°C to +85°C) • Compatible with 3.3 & 5V systems • Hot-pluggable (complies with GBIC specification Rev. 5.5) • Fully metallic enclosure for low EMI • Low power dissipation • RoHS compliant and Lead Free Applications • • 1.
PAGE 2
FTL-1319-3D-2.5 Long-Wavelength GBIC Specification – November 2007 I. Finisar Pin Out Pin Name Pin # Sequence RX_LOS 1 2 GND 2 2 GND 3 2 MOD_DEF(0) 4 2 MOD_DEF(1) 5 2 MOD_DEF(2) 6 2 TX_DISABLE 7 2 GND 8 2 GND 9 2 TX_FAULT (not supported) GND 10 2 11 1 -RX_DAT 12 1 +RX_DAT 13 1 GND 14 1 VCC 15 2 VCC 16 2 GND 17 1 +TX_DAT 18 1 -TX_DAT 19 1 GND 20 1 Table 1.
PAGE 3
FTL-1319-3D-2.5 Long-Wavelength GBIC Specification – November 2007 II. Finisar Electrical Power Interface Finisar FTL-1319-3D-2.5 GBICs have an extended power supply voltage range of 3.15 V to 5.5 V as described in Table 2. They are compatible with both 3.3V and 5 V systems. Parameter Symbol Min Supply Current Inrush Current Is Isurge Absolute Supply Voltage Vmax -0.3 Operating Supply Voltage Vcc 3.15 Typ Max Units 200 300 30 mA mA 6 V 5.5 V 3.
PAGE 4
FTL-1319-3D-2.5 Long-Wavelength GBIC Specification – November 2007 Parameter Symbol Min Typ Max RX_LOS Assert Level RX_LOS Deassert Level RX_LOS Hysteresis RX_LOS Assert Delay --31 --0.
PAGE 5
Finisar FTL-1319-3D-2.5 Long-Wavelength GBIC Specification – November 2007 V. Optical Parameters Parameter Symbol TRANSMITTER CHARACTERISTICS Transmitter Center Wavelength λc Transmitter Spectral Width ΔλRMS Transmitter Optical Output Power Pout Min Typ Max Units Notes/Conditions 1270 1310 -9 -6 1355 4 -3 nm nm RMS dBm Average power coupled into single mode fiber dB % Compliant with scaled FC3 and 2xGE eye masks.
PAGE 6
FTL-1319-3D-2.5 Long-Wavelength GBIC Specification – November 2007 VII. Finisar Environmental Specifications Parameter Operating Temp Relative Humidity Storage Temp Eye Safety Symbol Min Top RH Tsto -- -10 0 -40 Typ Max 85 85 85 Units Notes/Conditions °C % °C Case Temperature Non Condensing CDRH and IEC-825 Class 1 Laser Product. See Note 1 Note 1: Complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No. 50, dated July 26, 2001. Table 8.
PAGE 7
Finisar FTL-1319-3D-2.
PAGE 8
FTL-1319-3D-2.5 Long-Wavelength GBIC Specification – November 2007 Finisar IX. Mechanical Specifications Finisar GBICs are compatible with the mechanical specifications outlined in the GBIC Specification Revision 5.5, Section 61. Insertion, Extraction, and Retention Forces Parameter GBIC insertion GBIC extraction GBIC retention Symbol Min Typ Max Units Notes/Conditions FI 0 20 Newtons ~4.5 lbs FE 0 15 Newtons ~3.3 lbs FR 130 N/A Newtons Straight out ~29.3 lbs Table 10.
PAGE 9
FTL-1319-3D-2.5 Long-Wavelength GBIC Specification – November 2007 Finisar X. References 1. “Gigabit Interface Converter (GBIC) Revision 5.5”. Sun Microsystems Computer Company et. al., August 16, 1999. http://playground.sun.com/pub/OEmod/ 2. IEEE Std 802.3. IEEE Standards Department, 2002. 3. “Fibre Channel Physical and Signaling Interface (FC-PH, FC-PH2, FC-PH3)”. American National Standard for Information Systems. 4. Fibre Channel Draft Physical Interface Specification (FC-PI-2 Rev. 10.0).