Datasheet

FTLF1721P2xTL Pluggable SFP Product Specification –August 2008
© Finisar Corporation August 1, 2008 Rev. E Page 11
XI. References
1. Small Form Factor Pluggable (SFP) Transceiver Multi-Source Agreement (MSA),
September 2000. Documentation is currently available at Finisar upon request.
2. Bellcore GR-253 and ITU-T G.957 Specifications (Transmitter Optical Output
Power complies with SONET OC-48 requirements only).
3. IEEE Std 802.3, 2002 Edition, Clause 38, PMD Type 1000BASE-LX.
IEEE Standards Department, 2002.
(*)
4. “Fibre Channel Draft Physical Interface Specification (FC-PI-2 Rev. 7.0)”.
American National Standard for Information Systems.
(*)
5. Directive 2002/95/EC of the European Council Parliament and of the Council,
“on the restriction of the use of certain hazardous substances in electrical and
electronic equipment.” January 27, 2003.
(*) Neither IEEE 802.3 nor FC-PI-2 Rev. 7.0 specifies a 1310nm DFB single mode
interface. The FTLF1721P2xTL complies with these specifications except for transmitter
wavelength, receiver sensitivity, and transmit output power. See Section IV for details.
XII. For More Information
Finisar Corporation
1308 Moffett Park Drive
Sunnyvale, CA 94089-1133
Tel. [phone]
Fax [phone]
[e-mail]
www.finisar.com