Datasheet

FTLF8524P2xNy Pluggable SFP Product Specification – June 2009
© Finisar Corporation Jun 25, 2009 Rev.J Page 5
10. Measured with conformance signals defined in IEEE 802.3 specifications.
11. Rate Selectable version in low bandwidth mode.
12. Rate Selectable version in high bandwidth mode.
V. General Specifications
Parameter Symbol Min Typ Max Units Ref.
Data Rate BR 1.062,
1.25,
2.125,
4.25
Gb/sec 1
Bit Error Rate BER 10
-12
5
Fiber Length on 50/125μm MMF
L 550
300
150
m 2
3
4
Fiber Length on 62.5/125μm MMF
L 300
150
70
m 2
3
4
Notes:
1. 1x, 2x,4x Fibre Channel compatible, per FC-PI-2 Rev. 7.0. Rate selectable version is also Gigabit
Ethernet compatible per IEEE 802.3.
2. At 1.0625 Gb/s Fibre Channel data rate and, for rate selectable version, at 1.25 Gb/s Gigabit Ethernet
data rate.
3. At 2.125 Gb/s Fibre Channel data rate.
4. At 4.25 Gb/s Fibre Channel data rate
5. 4.25Gb/s with PRBS 2
7
-1.
VI. Environmental Specifications
Finisar 850nm SFP transceivers have an extended operating temperature range from
–20°C to +85°C case temperature.
Parameter Symbol Min Typ Max Units Ref.
Case Operating Temperature T
op
-20 85 °C
Storage Temperature T
sto
-40 85 °C
VII. Regulatory Compliance
Finisar transceivers are Class 1 Laser Products and comply with US FDA regulations.
These products are certified by TÜV and CSA to meet the Class 1 eye safety
requirements of EN (IEC) 60825 and the electrical safety requirements of
EN (IEC) 60950. Copies of certificates are available at Finisar Corporation upon request.