Datasheet

ManualsBrandsFinisar ManualsNetworkingFTLX0011D4BNL

Product Specification

RoHS-6 Compliant

Laserwire™ XFP Adapter

FTLX0011D4BNL

PRODUCT FEATURES

• Hot-pluggable XFP footprint

• Supports Laserwire™ data rates

of 9.95 Gb/s to 10.3 Gb/s

• RoHS-6 compliant (lead-free)

• Extended temperature range

-5°C to 85°C

• Single 3.3V power supply

• Customizable EEPROM

APPLICATIONS

• Adapts Laserwire™ plug for XFP

ports

Finisar’s FTLX0011D4BNL 10Gb/s Laserwire™ XFP Adapters are designed for use in

conjunction with Finisar’s Laserwire cables (Part Numbers: FCBP110LD1Lxx and

FCBC110LD1Lxx). The FTLX0011D4BNL XFP Adapter allows a Laserwire cable to

be plugged into an XFP port. The XFP Adapter incorporates a customizable EEPROM.

The Adapter is RoHS compliant and lead free per Directive 2002/95/EC

, and Finisar

Application Note AN-2038

PRODUCT SELECTION

FTLX0011D4BNL

Summary of content (9 pages)

PAGE 1
Product Specification RoHS-6 Compliant Laserwire™ XFP Adapter FTLX0011D4BNL PRODUCT FEATURES • Hot-pluggable XFP footprint • Supports Laserwire™ data rates of 9.95 Gb/s to 10.3 Gb/s • RoHS-6 compliant (lead-free) • Extended temperature range -5°C to 85°C • Single 3.
PAGE 2
FTLX0011D4BNL Laserwire XFP Adapter Product Specification – July 2010 I. Background Figure 1 illustrates the application of the FTLX0011D4BNL XFP Adapter. Pin descriptions for the FTLX0011D4BNL interface to the host board are shown in Section II. Please refer to the FCBP110LD1Lxx Laserwire datasheet for details of the interface between the FTLX0011D4BNL XFP Adapter and the Laserwire cable. The Laserwire connector pin-out is also shown in Section II for reference.
PAGE 3
FTLX0011D4BNL Laserwire XFP Adapter Product Specification – July 2010 II. Pin 1 2 Logic 3 LVTTL-I 4 5 6 7 8 9 10 11 Symbol GND VEE5 VCC5 GND VCC3 VCC3 SCL Name/Description (per INF-8077i) Module Ground Optional -5.
PAGE 4
FTLX0011D4BNL Laserwire XFP Adapter Product Specification – July 2010 Figure 1. Diagram of Host Board Connector Block Pin Numbers and Names, for pin-out reference. Details of host-board connector specifications can be found in INF-8077i3. Or refer to Finisar XFP datasheet (e.g.
PAGE 5
FTLX0011D4BNL Laserwire XFP Adapter Product Specification – July 2010 III. Absolute Maximum Ratings Exceeding the limits below may damage the transceiver module permanently. Parameter Maximum Supply Voltage Storage Temperature Relative Humidity Symbol Vcc TS RH Min -0.5 -40 0 Typ Max 4.0 85 85 Unit V °C % I. Non-condensing. IV. Electrical Characteristics (TOP = -5 to 85°C, VCC = 3.14 to 3.46 Volts) Ref. 1 Electrical characteristics assume a Laserwire cable is inserted into the Adapter port.
PAGE 6
FTLX0011D4BNL Laserwire XFP Adapter Product Specification – July 2010 VII. Mechanical Specifications Finisar’s Laserwire XFP Adapters are compatible with the dimensions defined by the XFP Mechanical Specifications in INF-8077i3, with the exception of the port design to accommodate the Laserwire plug. Figure 3. FTLX0011D4BNL Mechanical Dimensions. © Finisar Corporation - July 2010 Rev.
PAGE 7
FTLX0011D4BNL Laserwire XFP Adapter Product Specification – July 2010 VIII.
PAGE 8
FTLX0011D4BNL Laserwire XFP Adapter Product Specification – July 2010 Byte Addr Hex 140 8C 141 8D 142 8E 143 8F 144 90 145 91 146 92 … 164 A4 LSB 0 0 0 0 0 0 0 Bit Size 8 8 8 8 8 8 8 0 1 Name BR, minimum BR, maximum Length(SMF)-km Length(EMM-50um)-meter Length(50)-meter Length(62.5)-meter Length(Copper)-km Description Minimum Supported Bitrate (/100Mb) MaximumSupported Bitrate (/100Mb) Length (standard singlemode fiber)-km Length (extended b/w 50 um MMF) (/2m) Length (50um MMF) (/1meter) Length (62.
PAGE 9
FTLX0011D4BNL Laserwire XFP Adapter Product Specification – July 2010 IX. References 1. Directive 2002/95/EC of the European Council Parliament and of the Council, “on the restriction of the use of certain hazardous substances in electrical and electronic equipment”. January 27, 2003. 2. “Application Note AN-2038: Finisar Implementation Of RoHS Compliant Transceivers”, Finisar Corporation, January 21, 2005. 3. ”10 Gigabit Small Form Factor Pluggable Module”, SFF Document Number INF8077i, Revision 4.