Datasheet

FTLX1412M3BCL Multirate XFP Product Specification – September 2007 F i n i s a r
© Finisar Corporation 13-September-07 Rev B Page 5
IV. Optical Characteristics (T
OP
= -5 to 75°C, V
CC3
= 3.13 to 3.45 Volts)
Parameter Symbol Min Typ Max Unit Ref.
Transmitter
Output Opt. Pwr: 9/125 SMF P
OUT
-6 -1 dBm 1
Optical Wavelength
λ
1290 1330 nm
Optical Extinction Ratio ER 6 dB 1
Sidemode Supression ratio SSR
min
30 dB
Tx Jitter Generation (peak-to-peak) Tx
j
0.1 UI
Tx Jitter Generation (RMS) Tx
jRMS
0.01 UI
Relative Intensity Noise RIN -130 dB/Hz
Receiver
Receiver Sensitivity @ 10.5Gb/s R
SENS1
-14.4 dBm 2
Receiver Sensitivity @ 11.3Gb/s R
SENS2
-13.4 dBm 2
Stressed Receiver Sensitivity
(OMA) @ 10.5Gb/s
R
SENS3
-10.3 dBm 3
Maximum Input Power P
MAX
+0.5 dBm
Optical Center Wavelength
λ
C
1270 1600 nm
Receiver Reflectance R
rx
-14 dB
LOS De-Assert LOS
D
-18 dBm
LOS Assert LOS
A
-32 dBm
LOS Hysteresis 0.5 dB
Notes:
1. Having ER = 6 dB guarantees that the –6 dBm minimum output power meets IEEE 802.3ae
requirement of OMA=-5.2dBm.
2. Measured with worst ER; BER<10
-12
; 2
31
– 1 PRBS. Complies with –12.6 dBm OMA at ER = 6 dB.
3. Per IEEE 802.3ae. Equivalent to –13.3 dBm average power at Infinite ER, -11.08 dBm at ER = 6 dB.