User Manual

35
~ Appendix ~
SPECIFICATIONS:
MODEL: BE-55C
DIMENSIONS:
48” wide x 30” deep x 63” tall
SHIPPING WEIGHT:
600 lb
ELECTRICAL REQUIREMENTS:
208-240 VAC / 3 phase / 60 hertz / 40 amps
POWER CONSUMPTION:
12.8 kilowatts during atmospheric portion of process
6.8 kilowatts during vacuum portion of process
PROCESS TIME:
16-20 hours (55 gallons of 50/50 antifreeze/water @ 240 volts)
NORMAL YIELDS:
 31 gallons of Processed Water
18 gallons of Recycled Glycol
6-8 gallons of waste Residue (from 55 gallons of 50/50 mix)
BE-55C COMMON SPARE PARTS:
PART #
DESCRIPTION PART # DESCRIPTION
J102107 Heater Element (1pc. – 2000 watt) J101486 Contactor
J102200 Heater Plate Gasket (20 holes) J101584 Control Relay
J101558 Heat Exchanger Fan Motor J102540 Vacuum Pump Motor
J101888 Level Control Board J101484 Pressure Relief Valve
J101482 Phase Control Relay J101913 Condenser
J101621
TAS2 - 385 Over-temp Switch - N/C
J101119
TAS3 - 280 Divert Switch - N/O
J100212 Vacuum Gage
J102149
TAS4 - 180 Distillate Over-temp Switch – N/C
J101889 Drain/Fill Hose
J101210 Heat Exchanger (Radiator) J101480 2-Way Air Solenoid
J101481 2-Way Water Solenoid J102263 2-Way Fill Solenoid – N/C
J101892 3-Way Divert Valve w/Solenoid J101890 On/Off Switch
J103141 Drain Assist Switch
105378 2-Way Water Solenoid Repair Kit M101768 Upper Level Probe
M101769 Low Level Probe A102018 Fill Hose w/Wand
A101307 Vacuum Pump Assembly (w/ Motor) M101800 Pump Mounting Plate
108248 Vacuum Pump Assembly (less Motor)