Use and Care Manual

finishedelegance.com

Finished Elegance

can be painted should you select to change the color. If you are

going to paint Finished Elegance we encourage you to take the following steps:

Step 1: Remove dust, dirt, and fine particles with a damp towel/cloth

Step 2: Scuff with general purpose scuff pad or equivalent (320 grit or higher)

Step 3: Wipe clean with damp towel/cloth and allow to dry before painting

If you do paint Finished Elegance, remember the paint can only dry from the outside in

due to the coating. Therefore the dry time is significantly longer. Full cure could take as

long as 30 days.

Finished Elegance

puede pintarse si eliges cambiar el color. Si vas a pintar Finished Elegance, te

incitamos a que sigas los siguientes pasos:

Paso 1: Remueve el polvo, la suciedad y las partículas finas con una toalla/paño húmedo

Paso 2: Lija con una almohadilla para pulir de uso general o equivalente (grano 320 o mayor)

Paso 3: Enjuaga con una toalla/paño húmedo hasta que quede limpia y déjala secar antes de pintar.

Si pintas Finished Elegance, recuerda que la pintura solo puede secar desde el exterior hacia el interior

debido al revestimiento. Por lo tanto, el tiempo de secado es significativamente mayor. El tiempo de

curado completo puede durar hasta 30 días.

PAGE 1
Finished Elegance® can be painted should you select to change the color. If you are going to paint Finished Elegance we encourage you to take the following steps: Step 1: Remove dust, dirt, and fine particles with a damp towel/cloth Step 2: Scuff with general purpose scuff pad or equivalent (320 grit or higher) Step 3: Wipe clean with damp towel/cloth and allow to dry before painting If you do paint Finished Elegance, remember the paint can only dry from the outside in due to the coating.