happy Finnish 32in LED TV 32F8030-T Owner’s manual
Contents Package Contents................................................... 2 Viewing Internet Services ..................................... 23 Features.................................................................. 2 Using DLNA Network Service................................ 23 Introduction.............................................................. 3 Timeshift Recording . ............................................ 24 Preparation..............................................................
Package Contents Features • Remote controlled colour LED TV. • Fully integrated Terrestrial digital TV (DVB-T MPEG2) (DVB-T MPEG4) DVB-T2. Batteries: 2 X AAA • DVB-T2 Compliant. • 4 HDMI connectors. • 2 USB inputs. • Programme recording. • Programme timeshifting. INTERNET SCREEN EPG 1 • 10.000 programmes. LANG SUBTITLE TEXT FAV 2 PRESETS SLEEP Instruction Book • On Screen Display (OSD) menu system. 3 • 2 Scart sockets.
Introduction Thank you for choosing this product. This manual will guide you through the proper operation of your TV. Before operating the TV, please read this manual thoroughly. Please keep this manual in a safe place for future reference. This device is intended to receive and display TV programmes. The different connection options make an additional expansion of the reception and display sources possible (receiver, DVD player, DVD recorder, VCR, PC etc.). This device is only suitable for dry indoor use.
materials, such as a foil bag, must be kept away from children. • Batteries, including those which are heavy metalfree, should not be disposed of with household waste. Please dispose of used batteries in an environmentally friendly manner. Find out about the legal regulations which apply in your area. a battery medical aid has to be sought immediately. Also keep packaging away from children as there is a danger of suffocation. • Don’t try to recharge batteries, there is a danger of explosion.
Environmental Information • This television is designed to consume less energy to save environment. You not only help to save the environment but you can also save money by reducing electricity bills thanks to the energy efficiency features of this TV. To reduce energy consumption, you should take the following steps: • You can use the Power Save Mode setting, located in the Picture Settings menu.
Remote Control Buttons 1. Activate Portal mode (*) 2. Play (in Media Browser mode) 3. Programme recording 4. Fast rewind (in Media Browser mode) 5. No function INTERNET 6. Mono/Stereo - Dual I-II / Current Language (*) / Play preview (in Media Browser mode) 7. Image size SUBTITLE LANG SCREEN 8. Teletext / Mix EPG TEXT FAV PRESETS SLEEP 9. Electronic Programme Guide 10. Numeric buttons 1 11. AV / Source 12. Menu on/off 2 3 ABC DEF 4 5 6 13.
LED TV and Operating Buttons FRONT and REAR VIEW Control buttons VIEW Control Buttons 1. Standby/On button 2. TV/AV button 3. Programme Up/Down buttons 4. Volume Up/Down buttons Note: Press “ ” and buttons at the same time to view main menu. Viewing the Connections - Back Connectors 12 1 3 1. EXT 2 inputs or outputs for external devices. 2. EXT 1 inputs or outputs for external devices.
4. PC/YPbPr Audio Inputs are used for connecting audio signals of a PC or a device that connects to the TV via YPbPr. Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output of your PC to enable PC audio. Connect the audio cable between AUDIO INPUTS on the TV and audio outputs of your device to enable component audio. 5. Subwoofer Out is for connecting an external, active subwoofer to the set to give a much deeper bass effect.
Aerial Connection First Time Installation • Connect the aerial TV plug to the AERIAL INPUT socket located at the rear of the TV. 1 3 IMPORTANT: Ensure that the aerial is connected and a Common Interface module is not inserted before switching on the TV for the first time installation. Do not insert a common interface module during the search process. • When the TV is operated for the first time, the installation wizard will guide you through the process.
“disabled”, Store mode will not be available after the First Time Installation. • Press OK button on the remote control to continue and the following message will be displayed on the screen: To continue please select YES and press OK. To cancel operation, select NO and press OK.
Connecting to a DVD Player If you want to connect a DVD player to your LED TV, you can use various connections. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections. Note: Cables shown in the illustration are not supplied. • If your DVD player has a HDMI socket, you can connect via HDMI. When you connect to the DVD player as illustrated below, switch to HDMI source.
Using Side AV Connectors You can connect a range of optional equipment to your LED TV using side connectors of the TV. • For connecting a camcorder or camera , you should use AV socket (side). To do this, you must use the supplied video/audio connection cable. First, plug single jack of the cable to the TV’s AV IN socket (side). Afterwards, insert your camera cable’s (not supplied) connectors into the plural part of the video/ audio connection cable. Colours of the connected jacks should match.
CAUTION ! • Quickly plugging and unplugging USB devices, is a very hazardous operation. Do not repeatedly quickly plug and unplug the drive. This may cause physical damage to the USB player or the USB device itself. • Do not pull out USB device while playing or recording a file. Programme Recording To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature.
Connecting to a Wired Network (optional) For connecting to a wired LAN network, you should perform the following steps: • Connect a broadband ISP connection ethernet cable to the ETHERNET INPUT of your modem. • Ensure that Nero Media Home software is installed to your PC. (for DLNA function) • Afterwards, you should connect your PC to the one of your modem’s LAN connectors (e.g. LAN 1) by using an Ethernet Cable. • Use another LAN output of your modem (e.g. LAN 2) to enable the connection to your TV.
Connecting to a Wireless Network (Optional) IMPORTANT: “Veezy 100” USB dongle is required to use wireless network feature. To use your TV with your wireless network, you need a “Veezy 100” Wireless USB dongle. To make your modem’ s SSID visible, you should change your SSID settings via modem’s software. The TV cannot connect to the networks with hidden SSID.
Volume Setting Input Selection Once you have connected external systems to your TV, you can switch to different input sources. Press the “SOURCE” button on your remote control consecutively for directly changing sources. • Press “V ” button to increase the volume. Press “V ” button to decrease the volume. A volume level scale (slider) will be displayed on the screen. Programme Selection (Previous or Next Programme) • Press “ CH programme. ” button to select the previous • P r e s s “ C H programme.
EPG Now and Next Menu Blue button (Filter): Views filtering options. INFO (Event Details): Displays the programmes in detail. Numeric buttons (Jump): Jumps to the preferred channel directly via numeric buttons. OK (Options): views/records or sets timer for future programs. Text (Search): Displays “Guide Search” menu. SUBTTL: Press SUBTITLE button to view Select Genre menu. Using this feature, you can search the programme guide database in accordance with the genre.
switched off. You should then switch on the TV to enable the recording feature. Otherwise, the recording feature will not be available. • After you have selected a programme in EPG menu, press the OK button and and Options screen will be displayed. Select “Record” option and press the OK button. After this operation, a recording becomes set to the selected programme. • To cancel an already set recording, highlight that programme and press the OK button and select the option “Delete Rec. Timer”.
Select YES and press OK to continue or select NO and press OK button to cancel. Analogue Manual Search Managing Stations: Channel List The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options. • Press “MENU” button to view main menu. Select Channel List item by using “ ” or “ ” button. Press OK to view menu contents.
Deleting a Channel You can press GREEN button to tag/untag all channels; YELLOW button to tag/untag channel. • Select the channel that you want to delete and select Delete option. Press OK button to continue. • A warning screen will appear. Select YES to delete, select No to cancel. Press OK button to continue. Renaming a Channel • Select the channel that you want to rename and select Edit Name option. Press OK button to continue.
You can select a broadcast type option from the list by using “ ” /“ ” and OK buttons. On-Screen Information You can press “INFO” button to display on-screen information. Details of the station and current programme will be displayed on the information banner. The information banner gives information on the channel selected and the programmes on it. The name of the channel is displayed, along with its channel list number. Hint: Not all channels broadcast the programme data.
Slideshow Options Play ( button): Starts the video playback. Pause ( Stop ( button): Stops the video playback. Continue ( Pause ( button): Pause the video playback. Rewind ( button): Goes backward. Forward ( button): Goes forward. Subtitle/Audio (LANG. button): Sets subtitle/ Audio. Yellow: Opens subtitle time correction menu button) : Pauses the slideshow. button) : Continues the slideshow. Previous/Next (Left/Right buttons): Jumps to previous or next file on slideshow.
to enable all. You can follow the disabled functions with the change of the icons. Media Browser Settings Using DLNA Network Service Information DLNA (Digital Living Network Alliance) is a standard that eases the viewing process of digital electronics and makes them more convenient to use on a home network. For further information, visit www.dlna.org. The DLNA standard allows you to view and play photos, music and videos stored in the DLNA media server connected to your home network.
• Wait until the IP address is shown on the screen. This means that the connection is now established. See the chapter Network Settings for detailed configuration information. Step 3: Playing Shared Files via Media Browser • Select Media Browser by using Left or Right button from the main menu and press OK button. Media browser will be then displayed. • DLNA support is available only with Media Browser folder mode. To enable folder mode, go to Settings tab in the main media browser screen and press OK.
• Press (STOP) button to quit timeshifting mode. (*) Continuous time shift recording’s duration depends on your connected USB disk’s file size and defined Max. Timeshift in the Recordings Configuration menu. See the section, “Recordings” for more information on setting Max. Timeshift. Note: Switching to a different broadcast or source; and viewing the main menu are not available during the timeshifting.
14:9 Changing Image Size: Picture Formats • Programmes can be watched in different picture formats, depending on the transmission received. This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen. • You can change the aspect ratio (image size) of the TV for viewing the picture in different zoom modes. • Press “ SCREEN” button repeatedly to change the image size. Available zoom modes are listed below.
Advanced Settings Configuring Picture Settings You can use different picture settings in detail. Press “MENU” button and select the Picture icon by using “ ” or “ ” button. Press OK button to view Picture Settings menu. Dynamic Contrast: You can change contrast rate by using dynamic contrast function. Dynamic contrast can be set to one of these options: Low, Medium, High or Off Operating Picture Settings Menu Items • Press “ ” or “ ” button to highlight a menu item.
Operating Sound Settings Menu Items • Press “ ” or “ ” button to highlight a menu item. • Use “ ” or “ ” button to set an item. • Press “MENU” button to exit. Sound Settings Menu Items Volume: Adjusts volume level. Autoposition: Automatically optimizes the display. Press OK to optimize. Equalizer: Press OK button to view equalizer submenu. H Position: This item shifts the image horizontally to right hand side or left hand side of the screen.
Configuring Your TV’s Settings Detailed settings can be configured to suit your personal preferences. Press “MENU” button and select Settings icon by using “ ” or “ ” button. Press OK button to view Settings menu. Using a Conditional Access Module (not supplied) IMPORTANT: Insert or remove the CI module only when the TV is SWITCHED OFF. • In order to watch certain digital channels, a conditional access module (CAM) can be necessary. This module must be inserted in the CI slot of your TV.
Language Settings Configuring Language Preferences You can operate the TV’s language settings using this menu. Press “MENU” button and select the Settings icon by using “ ” or “ ” button. Press OK button to view Settings menu. Use “ ” or “ ” button to highlight Language and press OK to continue: In the Settings menu, highlight the Language Settings item by pressing “ ” or “ ” buttons. Press OK and Language Settings submenu will be displayed on the screen: Use “ ” or “ ” button to set an item.
Parental Control To prohibit viewing of certain programmes, channels and menus can be locked by using the parental control system. This function enables or disables the menu protection system and allows the PIN code to be changed. Press “MENU” button and select the Settings by using “ ” or “ ” button. Press OK button to view Settings menu. Use “ ” or “ ” button to highlight Parental and press OK to continue: To display parental lock menu options, PIN number should be entered.
Start: Enter a starting time using the numeric buttons. End: Enter an ending time using the numeric buttons. Duration: Displays duration between the starting and ending time. Repeat: Sets a timer to be repeated as Once, Daily or Weekly. Use “ ” or “ ” buttons to select an option. Change/Delete: Sets the change/delete permission. Playback: Sets the playback permission and parental settings. • Press GREEN button to save the timer. Press RED button to cancel.
Date, Time, Time Settings Mode and Time Zone Setting will be available. Use “ ” or “ ” buttons to highlight the Time Settings Mode. Time Settings Mode is set using “ ” or “ ” buttons. It can be set to AUTO or MANUAL. When AUTO is selected, Date/Time and Time Zone options will not be available to be set. If MANUAL option is selected as the Time Zone can be altered: Configuring IP Settings On IP Settings window you can set IP address of the TV set, which connects the TV to the Internet.
You can navigate between menu tabs by pressing left/right buttons. The help bar on the bottom of the dialog shows features that you may use. Press GREEN button to start searching for available wireless networks while device status is set as Enabled and Connection status is set as Not connected. Configuring Other Settings To view general configuration preferences, select Other Settings in the Settings menu and press OK button. Information Device Status: Displays wi-fi status as enabled or disabled.
Software Upgrade: To ensure that your TV always has the most update information, you can use this setting. In order for the proper operation, please ensure that the TV is set to standby mode. Other Features Displaying TV Information: Programme Number, Programme Name, Sound Indicator, time, teletext, channel type and resolution information is displayed on the screen when a new programme is entered or “INFO” button is pressed. Mute Function: Press “ ” button to disable sound.
Digital Teletext • Press the “ Analogue Teletext ” button. • The digital teletext information appears. • Operate it with the coloured buttons, cursor buttons and OK button. The operation method may differ depending on the contents of the digital teletext. Follow the instructions displayed on digital teletext screen. • When Press “OK” button or similar message appears on the screen, press the OK button. • When the “ ” button is pressed, the TV returns to television broadcasting.
Tips Screen Care: Clean the screen with a dry, soft cloth. Do not use abrasive solvents as they may damage the coating layer of the TV screen. For your safety, unplug the mains plug when cleaning the set. When moving the TV, hold it properly from the bottom part. Image Persistence: Please note that ghosting may occur while displaying a persistent image. LED TVs’ image persistence may disappear after a short time. Try turning off the TV for a while.
Appendix A: INTERNET PORTAL Appendix B: BBC iPlayer Launch You can access the PORTAL mode using your TV. To do this, an active internet connection is required. Follow the steps on Connecting to a Wired/Wireless (optional) Network section to connect your TV to the internet. After the connection is established, you can select or view portal options. You can access BBC iPlayer using your TV. To do this, an active internet connection is required.
Appendix C: PC Input Typical Display Modes The display has a maximum resolution of 1920 x 1200. The following table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD should appear on the screen giving you 15 seconds to change back to your last setting. Different graphics card and drivers allow for variable resolution support.
Appendix D: AV and HDMI Signal Compatibility (Input Signal Types) Source EXT-1 EXT-2 FAV (SIDE AV) YPbPr HDMI1 HDMI2 HDMI3 HDMI4 Supported Signals Available PAL 50/60 O NTSC 60 O RGB 50 O RGB 60 O PAL 50/60 O NTSC 60 O RGB 50 X RGB 60 X PAL 50/60 O NTSC 60 O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 1080P 50Hz O 1080P 60Hz O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz
Appendix E: Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information.
Appendix G: Software Upgrade • Your TV is capable of finding and updating new software upgrades over broadcast channels. • For broadcast channels search, theTV looks at the available channels stored in your settings. So before the software upgrade search, it is advised to auto search and update all available channels. 1) Software upgrade search via user interface • It is possible to manually check if there is a new software upgrade for your TV set. • Simply navigate on your main menu.
Appendix H: Nero MediaHome Installation This software is compatible with Windows XP and Windows 7. 3. Click the Next button. • The integrated serial is displayed. • Please do not change displayed serial. To install Nero MediaHome, please proceed as follows: Note: To use the DLNA function, this software should be installed to your PC. 1. Insert the Nero MediaHome installation disc in your optical disc drive.
6. Click the Next button. 9. Click the Next button. • The Select Installation Type screen is displayed. • The Ready to Start Installation Process screen is displayed, installation begins and finishes automatically. A progress bar informs you of the progress of the installation process. It is possible to choose between Typical, meaning standard installation, or Custom installation. User defined installation allows you to determine languages to be installed and to choose the installation path. 10.
12. Click the Exit button. 15. You can display all media types from the library. Click Refresh icon to refresh. Click STOP SERVER icon to stop server. 13. A shortcut called Nero MediaHome 4 is now placed on your desktop Congratulations! You successfully installed Nero MediaHome 4 on your PC. 14. Run Nero MediaHome by pressing shortcut icon. • Click ADD icon from LOCAL FOLDERS to add the folder you want to share with the network. Select the folder that you want to share and click START SERVER.
Specifications TV BROADCASTING PAL/SECAM B/G D/K K’ I/I’ L/L’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND NUMBER OF PRESET CHANNELS 10.000 CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERATING VOLTAGE 220-240V AC, 50 Hz. AUDIO OUTPUT POWER (WRMS.
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply.
50221074 www.finluxdirect.
