happy Finnish 47in 3D LED TV 47S9080-T Owner’s manual Customer Helpline Number: 0845 459 5282
Contents Environmental Information ..................................... 2 iPlayer Application................................................. 22 Accessories included............................................... 3 Digital Teletext....................................................... 22 TV - Features ......................................................... 3 Software Upgrade................................................. 23 Safety Precautions and Important Information........
Power cord and plug Screen • The power cord plug should be easily accessible. If there is lightning or storms, or if the TV is not going to be used for a while (e.g. if going away on holiday), disconnect the TV set from the mains. • Occasionally, a few non-active pixels may appear on the screen as a fixed blue, green or red point. Please note that this does not affect the performance of your product. • Do not place the TV, furniture, etc. on the power cord or pinch the cord.
Accessories included Safety Precautions and Important Information Remote Control Batteries: 2 x AAA Please read these instructions fully before installing or operating.
Operation with the Buttons on the TV Viewing the TV Volume Setting You can move the control switch upward or downward for changing the volume. To increase volume, please move the switch upward. Move the switch downward to decrease the volume. A volume level scale (slider) will be displayed on the screen. Programme Selection First press the control switch once to change channel. You can move the switch upward to select the next programme or move it downward to select the previous programme.
Remote Control 1. Standby / On 2. Channel list 3. Volume up-down 4. Menu on/off 5. OK / Channel list / Confirm 6. Return / Back 7. Internet Portal 8. My button 1 / Youtube (*) 9. My button 2 (**) 10. Coloured buttons (Red, Green, Yellow, Blue) TV 11. Mono-Stereo Dual I-II / Current language 12. Fast rewind (in media browser mode) 13. Pause (in media browser mode) / Timeshift recording 14. Programme recording 15. Play (in media browser mode) 16. Stop (in media browser mode) 17.
Connections Connector Type Cables Device Scart Connection (back) AUDIO L&R VGA Connection (back) PC/YPbPr Audio Connection (back) HDMI Connection (back & side) S/PDIF Optical Out (back) HEADPHONE Side AV Connection (side) Headphone Connection (side) YPBPR SIDE AV S/PDIF YPbPr Video Connection (back) AV Connection Cable (supplied) USB Connection (side) CI Connection (side) CAM module Subwoofer Connection (back) NOTE: When connecting a device via the YPbPr or Side AV input, you must use the s
Inserting the Batteriesinto theRemote Control 1. Lift the cover on the back of the remote upward gently. 2. Install two AAA batteries. Make sure to match the + and - ends of the batteries in the battery compartment (observe the correct polarity). First Time Installation When turned on for the first time, the “language selection” menu appears. The message “Welcome please select your language!” is displayed and all language options are listed alphabetically. 3. Replace the cover.
You can activate Store mode option by using “ ” or “ ” button. If Store Mode is selected, Store mode option will be available in “Other settings” menu and your TV’s settings will be optimized for best display quality. A confirmation screen will be displayed after selecting the Store Mode. Select YES to proceed. If Home Mode is selected, Store mode will not be available after the First Time Installation.
You can set your Media Browser preferences by using the Settings menu. Note: If two USB devices are connected to the TV at the same time, the first USB device connected to the TV will be named USB drive 1. Select the drive by using “ ” or “ ” buttons and press OK. Quick Menu The Quick Settings menu allows you to access some options quickly. This menu includes Power Save Mode, 3D Mode, Virtual 3D, Picture Mode, Equalizer Settings, Favourites and Sleep Timer options. Press Q.
Menu Features and Functions Picture Menu Contents 3D Settings Press to view 3D settings. Mode You can change the picture mode to suit your preference or requirements. The Picture mode can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural. Contrast Sets the lightness and darkness values of the screen. Brightness Sets the brightness value for the screen. Sharpness Sets the sharpness value for the objects displayed on the screen.
Menu Features and Functions Advanced Settings Dot Clock (in PC mode) Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts. Phase (in PC mode) Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by using trial and error.
Menu Features and Functions Settings Menu Contents Conditional Access Controls conditional access modules when available. Language Configures language settings. Parental Configures parental settings. Timers Sets timers for selected programmes. (USB Record) Recording Configuration Displays the recording configuration menu. Date/Time Sets date and time. Sources Enables or disables selected source options.
Electronic Programme Guide (EPG) Some, but not all channels send information about the current and next programmes. Press the “ - EPG” button to view the EPG menu. Set Timer / Delete Timer After you have selected a programme in the EPG menu, press the OK button and the Options screen will be displayed. Select the “Set Timer on Event” option and press the OK button. You can set a timer for future programmes. To cancel an already set timer, highlight that programme and press the OK button.
Record, Play, Pause, Display (for PlayListDialog) keys can not be used when teletext is ON. If a recording starts from the timer when teletext is ON, teletext is automatically turned off. Also teletext usage is disabled when there is an ongoing recording or playback. Timeshift Recording Press (PAUSE) button while watching a broadcast to activate timeshifting mode. In timeshifting mode, the programme is paused and simultaneously recorded to the connected USB disk.
• Do not spray cleaner directly onto the surface of the product.This may result in discoloration and cracks and may cause the screen display to peel off. • Do not let water come into contact with the product when cleaning it. Ensure that water does not enter the product. This may result in an electric shock or fire. • Since the surface of the product is easily scratched, make sure you clean the product with a soft cloth.
dark if you look down or if you lie on your side while watching 3D images using 3D glasses. • Flickering may be generated by the 3D glasses (60 Hz) when watching the 3D screen when a magnetic fluorescent lamp (50 Hz) is on. • The 3D picture may not be visible or become distorted when watching under intense light conditions. 3D Settings Press MENU button and select the Picture icon by using “ ” or “ ” buttons and press OK. Use “ ” or “ ” to select 3D settings and press OK to view.
Vertical Viewing Angle 3D Viewing Information Your 3D Viewing experience can be affected by the location of the viewer and the TV set. To maximise your enjoyment we recommend you follow the guidelines below: It is recommended to place the TV at the correct seated eye height of the viewer. If the TV must be placed higher or lower it should be tilted accordingly using suitable stand or wall mount.
DTV ATV OTHER 1080p@24 FP Not Supported Not Supported Not Supported 720p@50 FP Not Supported Not Supported Not Supported 720p@60 FP Not Supported Not Supported Not Supported 1080p FC SBS, TB Not Supported SBS, TB 720p FC SBS, TB Not Supported SBS, TB 1080i FC SBS Not Supported SBS OTHER (*) Not Supported Not Supported Broadband ISP Connection Lan(Ethernet cable) Rear of TV Please note that if you apply 720p FC TB input; the picture will be scaled smaller than the original s
Configuration Status This section displays the status of the connection. Select Connected if you want to activate a connection. Select as Not Connected to end an active connection. IP Address If an active connection is available, the IP address will be displayed on this section. If you want to configure an IP address preference, press the GREEN button and switch to the advanced mode. Configuring Wired Network Settings in Advanced Mode After pressing the GREEN button, the “Advanced mode” will be available.
If the selected network is protected with a password, please enter the correct key by using the virtual keyboard. You can use this keyboard via the navigation buttons (“ ” or “ ”, “ ” or “ ”) and the OK button on the remote control. • Connect to your router following the steps stated above in the Wireless Connection section. • Afterwards, engage your cell phone with the router and then activate the sharing software on your cell phone. Then, select files that you would like to share with your TV.
1. Nero Media Home Installation The DLNA function cannot be used if the server program is not installed on to your PC. Please prepare your PC with the provided Nero Media Home programme. For more information about the installation, please refer to appendix H. 2. Connect to a Wired or Wireless Network See the chapter Network Settings for detailed configuration information. 3. Play Shared Files via Media Browser Select Media Browser by using the “ ” or “ ” buttons from the main menu and press OK.
Internet Portal iPlayer Application Ensure the TV is connected to a Wired/Wireless Internet connection. After the connection is established, you can select or view portal options. Note: A Broadband Internet connection is required for high quality viewing. Ensure that the internet connection is made properly. You must set the Country and Language data correctly in the First Time Installation for the proper operation of the internet portal. You can access BBC iPlayer using your TV.
Software Upgrade Licence Notifications Your TV is capable of finding and updating automatically via the Aerial signal or over the Internet. Manufactured under license from Dolby Laboratories. Background search and upgrade mode “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. While the TV is connected to the Internet, if new software is found, it downloads the upgrades automatically when the TV next powers on from standby. 3.
Appendix A: Nero MediaHome Installation This software is compatible with Windows XP and Windows 7. Note: To use DLNA function, this software should be installed to your PC. To install Nero MediaHome onto your computer. 1) Insert the Nero MediaHome installation disc into your optical disc drive. 2) The Nero MultiInstaller screen will open automatically. 3) Click on the button labeled Nero MediaHome 4 Essentials to start the installation process.
Appendix B: PC Input Typical Display Modes The following table is an illustration of some of the typical video display modes. Your TV supports up to 1920x1200.
Appendix D: Supported File Formats for USB Media Browser Media Movie Extension Format Notes Video Audio dat, mpg, mpeg Mpeg1,2 MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM 1080P@ 30fps 50Mbit/sec dat, mpg, mpeg MPEG2 ,H.264, VC1, AVS, MVC MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM H.264:1080Px2@25fps 1080P@ 50fps MVC: 1080P@ 24fps Other: 1080P@ 30fps” 50Mbit/sec .vob MPEG2 MPEG1/2 Layer 1/2/3, AC3, LPCM 1080P@ 30fps 50Mbit/sec .
Appendix E: Supported DVI Resolutions When connecting devices to your TV’s connectors using DVI converter cable (not supplied), you can refer to the following resolution information. 24Hz 25Hz 30Hz 50Hz 480i 60Hz þ 480p þ 576i þ 576p þ 720p þ þ 1080i þ þ þ þ 1080p þ þ þ SKY Remote Control Code The Sky Code is 065: 1 Turn your TV on. 2 Press TV on your Sky remote control handset.
50225524