Operation Manual

5.3 Computer Functions
5.3.1 Immediate-Start function
In order to provide optimum user friendliness of your training equipment, an opportunity for quick and uncomplicated initiation of training
was devised. Please do the following :
• Connect the power supply included in the scope of delivery to the bottom end of the equipment, at the socket provided. A test image
will brie y appear on the computer. After a short time „U0, U1, U2, U3 or U4“ will appear in the center of the digital display.
• Start your exercise by pedalling. You have activated the last used, all values start counting up. After you have  nished your exercise,
the reached values will not be safed in the, if you have selected U0!
3s< press: check 2) Setting of personal
datas
<1s press: check 5.4.2 Watt Mode
29
→ →
→
→
→
→
→ →
1) USER-Selection
→
The selected User (U0-U4) will
be shown in the display.
5.4.1 User selection and setting of personal datas.
You are in the independant mode. The already
set data will start counting backwards. If the
set data reach 0, the computer will stop and a
beep will be heard. If you didn´t set any values,
all data will start counting up.
5.4. Exercise with User setting
→