Operation Manual

Om montage van de speedbike zo gemakkelijk mogelijk voor u
te maken, hebben wij de meest belangrijke onderdelen
voorgemonteerd. Voordat u begint met de montage van het
fitnessapparaat, lees aandachtig de onderstaande instructies
en volg het stappenplan zoals omschreven.
Inhoud van de verpakking
l Pak alle individuele onderdelen uit en plaats ze naast
elkaar op de vloer.
l Plaats het hoofdframe op een mat ter bescherming
van de vloer. Zonder een mat bestaat de kans dat uw
vloer beschadigd raakt of krasschade oploopt. De mat
dient vlak en niet te dik te zijn, zodat het hoofdframe
een stabiele ondergrond heeft.
l Zorg ervoor dat u in alle richtingen voldoende ruimte
overhoudt voor beweging tijdens het monteren
(minimaal 1,5m).
In order to make assembly of the exercise bike as easy as pos-
sible for you, we have preassembled the most important parts.
Before you assemble the equipment, please read these instruc-
tions carefully and then continue step by step as described
Contents of packaging
l Unpack all individual parts and place them alongside each
other on the floor.
l Place the main frame on a pad protecting the floor,
because without its assembled base feet it can damage /
scratch your floor. The pad should be flat and not too thick,
so that the frame has a stable stand.
l Make certain that you have adequate room for movement
(at least 1.5 m) on all sides during assembly.
3. Montage
3. Assembly
04
3.1 Montage stappenplan / Assembly steps
Stap / Step 1