Installation & Assembly

ManualsBrandsFiore Stone ManualsOutdoor DecorConcrete Shell Quatrefoil Fountain

CARE AND MAINTENANCE

• Clean water is obviously the best way to maintain a

beautiful water feature. Change water frequently and use

water additives. Inquire with your dealer.

• It is not recommended that fountains be left running

during the night or when not at home as the water level

cannot be monitored. NEVER LET THE FOUNTAIN RUN

DRY!!! Lack of water will burn out the pump. The rule of

thumb is that if a fountain runs continuously for eight

hours you are bound to have to add more water to it.

• Concrete by nature absorbs moisture and in colder

climates, this can have adverse effects on concrete.

Concrete left standing in water, not properly covered or

protected can during freezing temperatures pit, crumble,

or in some cases even crack concrete.

• Never allow water collected in bowls to freeze

TROUBLESHOOTING

• Is there enough water in the fountain?

Many require a full water level to operate properly.

• Is the plastic tubing kinked, blocking the water flow?

• Did the circuit breaker go off?

• Is there debris, leaves, mineral buildup, etc. blocking

the intake to the pump?

• Is there an “airlock” in the pump?

Plug and unplug the pump several times to clear it or pour

water into the tubing.

• Is the propeller in the pump turning?

Consult pump manufacturer’s directions for servicing

supplied with the pump.

• Possible leakage?

Check for leaks by filling the fountain without operating the

pump. If you do not see water around the base, it might be

splash out on a windy day or a thirsty pet!

• Excess splash? In some cases, water clings to lips or

spillways, causing water to fall erratically. Applying a small

amount of clear silicone at those points where water is

designed to fall could help produce a continuous pour and

reduce splash. Simply place a small amount of silicone on

your finger and lightly apply by pulling down, creating an

up-side-down teardrop for water to follow.

COLOR DISCLAIMER

Each item is finished and antiqued by hand in wide variety

of designer colors. Al's Garden Art products are made of

natural materials and color appearance may vary by

degree of texture, size, shape of area and lighting.

Each work of art is unique and will vary in color. Because

of this Al's Garden Art can not accept any returns of

products not actually matching the colored sample disc or

items on display. Unless properly treated all water

features experience calcium buildup. In addition, cement

products contain minerals associated with efflorescence.

Although our mix design contains minimal amounts of

minerals associated with efflorescence, complete isolation

is impossible.

FITTINGS LIST

Note: Al’s Garden Art supplies the appropriate fittings

required for assembly of each

fountain model. This

illustration is for identification purposes only

No. Description No. Description

AG-01 TUBING, ⅜"ID ½"OD AG-90S L BRACKET, SMALL

AG-02 TUBING, ½"ID ⅝"OD AG-90 L BRACKET, LARGE

AG-05 BRASS JET AG-91 COPPER ELBOW, LARGE

AG-08 TUBING, 1"OD AG-92 COPPER ELBOW, SMALL

AG-15 PERMA GUM AG-93 COPPER PIPE ½" (4" LONG)

AG-16 WOBBLE WEDGES AG-94 COPPER PIPE ½" W/VINYL

AG-20 THREADED NIPPLE ½" AG-95 PVC ½" THREAD TO SLIP

AG-21 THREADED BARB ¼" AG-97 TUBING, ⅝"ID ¾"OD

AG-22 PIPE - FEMALE HOSE AG-99 INLINE CHECK VALVE, ¾”

AG-23 THREAD ½" SLIP ELBOW AG-100 PVC CROSS FITTING, 1”

AG-24 PVC PIPE ½" AG-103 HP PUMP HOSE

AG-26 DRAIN PLUG AG-104 PVC PIPE 1"

AG-27 T FITTING (½" BARB) AG-105 PVC ½" SLIP TO SLIP

AG-28 Y FITTING (½" BARB) AG-106 COPPER PIPE ½" (6" LONG)

AG-29 PAINT (PAINT/ANTIQUE) AG-107 PVC REDUCER ¾" TO ½"

AG-30 PAINT AG-108 PVC ½" BALL VALVE

AG-31 ANTIQUE AG-111 PVC 1½" SLIP FITTING

AG-36 ELBOW (½" SLIP) AG-112 PVC 1½" PIPE

AG-38 GROMMET AG-113 PVC 1½" SLIP T

AG-41 ELBOW (½" BARB) AG-114 PVC 1½" SLIP/TREAD ½"

AG-42 THREAD ½" TO BARB ½" AG-115 PVC ½" TREAD TO TREAD

AG-53 PVC ½" SLIP T

For replacement parts, contact your local Al’s Garden Art

retailer or locate a dealer at alsgardenart.com

LIMITED WARRANTY

Al's Garden Art offers a one (1) year manufacturers

warranty extended through its dealer network. Please visit

our website (support) at www.alsgardenart.com

For warranty issues you may contact Al’s Garden Art

direct via e-mail at info@alsgardenart.com

. Proof of

purchase is required and images may determine cause.

ASSEMBLY INSTRUCTIONS

WALL FOUNTAINS

(self-contained water feature)

Models:

-FW, -FWS, -FCW

Pedestal and Basin Type

AL’S GARDEN ART

Cast stone fountains and statuary manufacture

by Fiore Stone, Inc., family owned and operate

with more then half a century of skill an

assion for creating top quality cast stone art.

Summary of content (2 pages)

PAGE 1
CARE AND MAINTENANCE ASSEMBLY INSTRUCTIONS WALL FOUNTAINS FITTINGS LIST • Clean water is obviously the best way to maintain a beautiful water feature. Change water frequently and use water additives. Inquire with your dealer. • It is not recommended that fountains be left running during the night or when not at home as the water level cannot be monitored. NEVER LET THE FOUNTAIN RUN DRY!!! Lack of water will burn out the pump.
PAGE 2
• Concrete by nature absorbs moisture and in cold climates, this can have adverse effects on concrete. Concrete left standing in water, not properly covered or protected can during freezing temperatures pit, crumble, or in some cases even crack concrete. • Never allow water collected in any fountain to freeze • Risk of electrical shock. Pumps are supplied with a grounding conductor and grounding-type attachment plug.