User's Manual

UM-0101-01.09 – November 2009
3
3. Commissioning
Connection
1. Connect service antenna (“TO MOBILE” port) and donor antenna (“TO BASE” port) coaxial
cables. SMA type female connectors are used in the repeater.
2. Once RF ports of the repeater are properly loaded connect the DC plug from power supply to
nanoSAW DC input.
The repeater powers on when power supply is connected to the AC line, and nanoSAW is
properly feed with DC voltage. Blue led labelled “PWR ON” must be on, under normal power
conditions.
Figure 2
Figure 2 shows DC input plug position.