User's Manual

UM-0840 30
 IP: At this page (for units with Ethernet supervision), IP addresses configuration and
addresses of SNMP Managers are shown. User can set addresses of two SNMP
Managers (IP where SNMP agent will send TRAP information). To modify, click over
Apply Changes link after writing new values on text fields. Also router 3G IP address
can be viewed in this screen (if 3G router option is installed)
 Downlink Spectrum: in order to know input signal: level of desired channels,
unwanted channel levels, Digital Master provides an spectrum analyzer that shows
input signal in frequency domain.
 Date & Time (for units with Ethernet supervision): page to modify real time clock.
When the repeater is not powered, this clock runs with a voltage supply provided by