User's Manual

UM-0840 40
User interface has the following controls:
 Scan Devices Button: refresh the available COM ports and identify Fiplex devices
 Connection Button: connect / disconnect software from repeater
 List of available devices: below two buttons, is placed a dropdown list that shows all
available COM ports. Available COM ports not related to Fiplex devices will be shown
with its number and “Unknown device” label. COM ports related to Fiplex devices will
show a device description.
 Embedded Web browser: graphical area where configuration and monitoring parameters
will be shown.
 File menu: contains menus to save repeater configuration to a file and load configuration
from file to repeater.
NOTE: if Fiplex Repeater is not turned on, related COM port will appear as “Unknown
device”
8. Click “Scan Devices”