User's Manual

UM-0915 12
6. Turn on the Signal Amplifier
BE SURE THAT RF PORTS ARE PROPERLY LOADED EITHER WITH
50 OHMS DUMMY LOADS, OR RADIATING SYSTEM.
7. Execute the Fiplex Control Software. Next window will appear:
User interface controls:
 Scan Devices Button: refresh the available COM ports and identify Fiplex devices
 Connection Button: connect / disconnect software from Signal Amplifier
 List of available devices: below two buttons, is placed a dropdown list that shows all available COM
ports. Available COM ports not related to Fiplex Signal Amplifier will be shown with its number and
“Unknown device” label. COM ports related to Fiplex Signal Amplifier will show a device description.
 Embedded Web browser: graphical area where configuration and monitoring parameters will be
shown.