User guide

Distributed Audio Panel Manual — P/N 52265:B1 6/8/2010 49
Installation of Option Modules Installation
3. Make certain the module is properly seated on the standoffs.
4. Secure the FC-MGM with the supplied screws.
3.8.4 FC-LPS Local Playback Speaker Module
The Local Playback Speaker Module can be used to monitor the recorded digital message without
transmitting the message over the system speakers. The speaker module plugs into FC-MGM cir-
cuit board. This optional module is necessary to take advantage of the Playback feature.
The Speaker Module is connected by simply plugging the module connector into P2 of the
FC-MGM module. The Speaker Module may be temporarily installed during the test period.
1. Plug the FC-LPS Local Playback Speaker Module's polarized connector into connector P2 on
the FC-MGM circuit board.
2. Allow the speaker to carefully hang down from the main circuit board being careful not to
short any components on the board.
3. When testing is completed, remove the speaker connector from P2 on the FC-MGM.
PLAYBACK
MESSAGE
TROUBLE
PC MIC/LINE OUT
MIC INPUT
RCA
P1
P2
J1
JP1
SW4
SW1
SW2
SW3
J2
RECORD
RECORD BYPASS
SPKR
ON
1 2 3 4 5 6 7 8
6 2 220 35v
6 2
220
35v
TROUBLE
RELAY
S5
S1
P5
P6
TB5
TB1
P1
P2
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
Figure 3.18 FC-MGM Module Installation
Standoffs
(Step 1)
Standoffs
(Step 1)
Distributed Audio Panel Main Circuit Board
FC-MGM Module
Install
(Step 2 & 3)
vxptomgm.wmf