Instruction Manual

1. Product Overview Canadian Information
10
ACM-16ATF/ACM-32AF Manual PN 51480:A0 02/02/01
Canadian Information
The National Standard of Canada (CAN/ULC-S527) requires that a
dedicated display employ yellow visual indicators to indicate the status of
supervisory inputs. The Fire•Lite annunciators listed in this manual are
intended to be used for Canadian Supervisory Service in conjunction with
Fire•Lite Sensiscan 200, Sensicsan 2000, MS-9200 and MS-9600 control
units. The ACM-16ATF/AEM-16ATF and ACM-32AF/AEM-32AF
annunciators can not be employed for ULC Supervisory Service. See
Canadian Requirements for Supervisory Signal in Fire•Lite Document
50057.
Annunciator control and expander modules in the “Y” series have been
designed with yellow LEDs.
Related Documentation
Further details about products referenced in this document can be found in
the manuals for the particular fire alarm control panels and components.
Table 1 Related Documentation
Product
Part
Number
Sensiscan 200 Fire Alarm Control Panel Instruction Manual 15032
Sensiscan 2000 Fire Alarm Control Panel Instruction Manual 15017
MS-9200 Fire Alarm Control Panel Instruction Manual 51003
MS-9600 Fire Alarm Control Panel Instruction Manual 51335
UDACT-F Instruction Manual 50049
APS-6RF Auxiliary Power Supply Instruction Manual 50893
FCPS-24F Field Charger/Power Supply Instruction Manual 50079
Canadian Requirements for Supervisory Signal 50057
Fire•Lite Device Compatibility Document 15384