Instruction Manual

ACM-16ATF/ACM-32AF Manual PN 51480:A0 02/02/01
11
2. Inventory
ACM-16ATF Series
Control Modules
ACM-16ATF
Incorporates 16 red “point active” and 16 yellow
“trouble” LEDs, 16 momentary touch-pad switches
for controlling each point, a system trouble LED, an
On-line/Power LED, and a local piezo sounder with
a silence/acknowledge switch for audible
indication of alarm and trouble conditions at each
annunciator.
Height = 8-3/8" (21.27 cm)
Width = 4-3/8" (11.11 cm).
Note: In Canada this module must be used to
annunciate the fire alarm input points/zones only.
ACM-16ATCS4F (for use in Canada)
The ACM-16ATCS4 contains 12 red “point active”, four yellow “point
active”, and 16 yellow “trouble” LEDs, 16 momentary touch-pad switches
for controlling each point, a system trouble LED, an On-line/Power LED,
and a local piezo sounder with a silence/acknowledge switch for audible
indication of alarm and trouble conditions at each annunciator.
Note: In Canada this module must be used to annunciate supervisory and burglary
signals from associated points/zones.
ACM-16ATYF
Same as the ACM-16ATF, except that all LEDs are yellow (yellow On/Alarm
and yellow Trouble).
Note: In Canada this module must be used to annunciate supervisory and burglary
signals from associated points/zones.
Note: In Canada the color red may only be used to indicate active alarm inputs. The
color yellow may be used to indicate supervisory, burglary and trouble signals, and
the color green may be used to indicate the presence of power, or an activated
output.
ACM-16AT.cdr