User guide

Programming for DACT-UD2
DACT-UD2 Communicator PN 53037:B 4/01/08 29
Report Style
Pressing 3 while viewing Central Station Screen #2 will cause the Report Style
display to toggle between Point and Zone. Setting the Report Style to Point will
program the DACT-UD2 to report individual point status to the Central Station.
The control panel is capable of monitoring a total of 636 addressable devices.
Setting the Report Style to Zone will program the DACT-UD2 to report zone status
to the Central Station. The control panel is capable of monitoring a total of 99
individual zones.
Notes on Central Station Reporting:
1. SLC Loop 1, Detector Address 01 will be reported to the Central Station as
Point 01, Detector Address 02 as Point 02, with reports continuing in a similar
fashion all the way up to Detector Address 159 which will be reported as Point
159.
2. SLC Loop 1, Module Address 01 will be reported to the Central Station as
Point 160, Module Address 02 will be reported to the Central Station as Point
161, with reports continuing in a similar fashion all the way up to Module
Address 159 which will be reported as Point 318.
3. SLC Loop 2, Detector Address 01 will be reported to the Central Station as
Point 319, Detector Address 02 as Point 320, with reports continuing in a
similar fashion all the way up to Detector Address 159 which will be reported
as Point 477.
4. SLC Loop 2, Module Address 01 will be reported to the Central Station as
Point 478, Module Address 02 as Point 479, with reports continuing in a
similar fashion all the way up to Module Address 159 which will be reported as
Point 636.
3.1.1.5.5 Supervised Phone Line
The Supervised Phone Line feature allows the user to disable or enable the
supervision of Phone Line 2 by the DACT. The factory default setting is Phone
Line 2 supervised.
Pressing 3 for Superv Phone Line while viewing Onboard DACT Screen 2 will
cause the following screen to be displayed:
Each press of the 1 key while viewing this screen will toggle the option between
Supervise Phone Line 2 Yes and No.
CENTRAL STATION
1=PRIMARY
2=SECONDARY
3=REPORT STYLE
Central Station Screen #2
CENTRAL STATION
1=PRIMARY
2=SECONDARY
3=REPORT STYLE POINT
Central Station Screen #2
ON BOARD DACT
1=SERVICE TERMINAL
2=CENTRAL STATION
3=SUPERV PHONE LINE
On Board DACT Screen #2
SUPERVISE PHONE LINE
1=PHONE LINE 2 YES
Panel ID Screen