Owner's manual

IPDACT-2(UD) - Appendix
IV-42
Doc.DM385-I
Rev. 4.0
IV - Appendix
IV - 1. IPDACT-2/IPDACT-2UD Technical
Specifications
Power Supply
NOMINAL VOLTAGE RANGE 10 VDC – 24 VDC
MAX CURRENT
1
IPDACT-2
12V: Idle: 180 mA Alarm: 230 mA Transient
2
: 400mA
24 V: Idle: 93 mA Alarm: 136 mA Transient
2
: 200mA
MAX CURRENT
1
IPDACT-2UD
12V: Idle: 185 mA Alarm: 230 mA Transient
2
: 400mA
24 V: Idle: 98 mA Alarm: 155 mA Transient
2
: 200mA
Dimensions and weight
LENGTH x WIDTH x HEIGHT 149 x 117 x 22 mm
WEIGHT 150 gr
Environmental Specifications
OPERATING TEMPERATURE 0º to 49º C (32º to 120º F).
RELATIVE HUMIDITY Maximum: 93%
LAN Port
CONNECTOR RJ45 female
SPEED 10 Mbps
PROTOCOLS UDP, IP, ARP, DHCP, Telnet, Ethernet Blue Book
Upload/Download Modem (IPDACT-2UD only)
SPEED From 75 bps up to 14400 bps
STANDARDS Bell202, V.23, Bell 103, V.21, V.22, V.22bis, V.32, V.32bis
COMPATIBLE CONTROL PANELS Ademco Vista12, Ademco Vista48, Paradox Spectra, General Electric
NetworX, Firelite 9200UD, Firelite 9600
Other Characteristics
OUTPUT1 and OUTPUT2
500mA max. if V ≤ 30 V
DC for resistive loads
INPUT1 and INPUT2 Normally Open, 1K EOL supervised.
1
The IPDACT-2(UD) power consumption should be subtracted from the maximum power of the output
delivered by the control panel. A 750mA power source is recommended in all cases.
2
Transient lasting 75ms is produced when the control panel takes over the telephone line to call the control
center.