User Manual

50 Pt Addr Panel
PS-Tools 08/2010 21
5
5 Configuring Fire Panels
Using PS-Tools, you can configure the fire panel settings. Configuring a fire panel involves:
• Configuring the settings for input and output modules.
• Configuring the fire panel settings such as date and time, banner display, fire panel
passwords, and other panel settings.
• Configuring the SLC loop setup for the detectors and modules.
• Verifying the SLC loop setup.
• Simulating the setup to evaluate SLC loop.
• Modifying the customer details in the server.
• Migrating the configuration information from PK-Plus to PS-Tools database.
After you configure the fire panel settings, connect the computer to the fire panel and download the
configuration settings. In addition, you can upload the configuration information from the fire
panel, and view the fire alarm system settings in PS-Tools.
The following table describes the tasks you can perform using different sections of this chapter.
Section Description Refer to
Selecting Configuration
Type
To select a configuration type in
PS-Tools.
page 23
Configuring System Info To configure the communicator settings,
input/output modules, and the general
system settings.
page 23
SLC Loop Setup To add detectors and modules to the
SLC loop.
page 39
Save to Database To save the configuration in the
PS-Tools database.
page 51
Save as Template To save the configuration as a template. page 52
Verify Setup To verify the SLC loop setup. page 52
Simulation To view the zone correlations for the
installed devices, to confirm the pro
-
gramming.
page 54
Upload Information To view the uploaded information from
the 50 Pt Addr panel.
page 57
Comparing Configuration To compare the configuration for two
different customers.
page 60