User Manual

24 50 Pt Addr Panel
PS-Tools 08/2010
Configuring Fire Panels
a. Detectors (see Detectors)
b. Modules (see Modules)
Communicator Settings
The Digital Alarm Communicator/Transmitter (DACT) module is used for transmitting system status
to central station receivers through the public switched telephone network. All circuitry and
connectors are contained on a compact module, which is located near the lower - center of the main
circuit board.
In PS-Tools, you must enable the reporting from the communicator, to report the fire alarm system
status, alarm, and trouble conditions to the central station through the public switched telephone
network. The System Info -> Communicator Settings ->Central Station pane appears after you
select the configuration type.
Figure 5-1 Configure Commun
icator Settings
To configure the communicator
1. Click Communicator Enabled, to enable the reporting from the communicator.
2. Type the No. of Rings to Answ
er, which is the number of rings after which a call is answered
by the panel.