User Manual

PS-Tools User Guide
50 Pt Addr Panel
PS-Tools 08/2010 27
5. Type the Test Start Time to program the time at which the modules run the test. Type a four
digit number using military time (0000 refers to 12:00AM and 2359 refers to 11:59 PM).
6. Click Save to Database to save the configuration.
If you want to view the central station settings, click Prev.
7. Click Next or click Secondary Central Station in the left pane, to configure the secondary
central station.
Secondary Central Station
The secondary central station is the next available central station that the modules contact to report
the fire alarm system status, alarm, and trouble events. The configuration of the secondary central
station involves the same steps as the primary central station. In addition you can specify if the phone
line requires supervision. For more information, see Primary Central Station.
After you configure the secondary central station:
•Click Next to configure the input/output modules.
• Alternatively, you can click Input/Output in the left pane to view the Input/Output
configuration pane.