Installation and Owner's Manual

30
For Environments High In Salt, Chloride, Or Other Corrosive Chemicals
When this sideburner is installed in a corrosive environment such as near the ocean (salt air), poolside (chlorine
and/or pool chemicals) or any other location with exposure to high salt/chloride content or corrosive chemicals/
solutions, it will be more susceptible to corrosion and MUST be maintained/cleaned more frequently.
• DO NOT store any corrosive chemicals (chlorine, hydrochloric acid, fertilizer, etc.) near your stainless steel unit.
• DO NOT allow any corrosive materials (masonry dust, debris, etc.) to settle on your stainless steel unit.
• These environments, chemicals, and materials may cause the 304 stainless steel to develop surface rust and
consequently pitting. Under these conditions the sideburner exterior MUST be cleaned at least monthly. Inspect your
unit often and clean accordingly.
Protecting Your Sideburner
In addition to the supplied sideburner lid (placed first), an optional protective cover will protect your sideburner when not in
use. Install the cover on a cool and dry sideburner. DO NOT cover a damp sideburner. During high humidity or after rainy
conditions, remove the cover to dry trapped moisture if present. (If the cover is installed over a damp sideburner it can
cause surface rust.)
Ensure that the INSIDE of the cover is DRY before putting it back on the sideburner.
SERVICING AND CLEANING (cont.)