User Manual Single Searing Station

19
Fig. 19-1 Tab may interfere when sliding in unit
Fig. 19-2 Tab slightly bent in for clearance
SLIDE UNIT INTO ENCLOSURE
Slide the unit into place. Do not to pinch, kink, or
damage the gas connector line.
Note: Each side of the unit has a tab just behind
the control panel. These tabs prevent the
control panel from moving inward. If the
tabs interfere with the unit sliding in (see
Fig. 19-1), use pliers to bend them inward
so that they clear the enclosure sides.
Leave the tabs slightly out to ensure they
still keep the control panel from moving
inward (see Fig. 19-2).
INSTALLATION (cont.)