Installation Instructions

3
CONTENTS
Do not strike or scrape the ceramic portion of the burners with hard tools, as the material may crack,
chip, or break. Prevent any grease, water, or other foreign material from getting into the ceramic portion
of the burners, especially when cold. Always wait for the burners to heat up to a well-distributed red glow
before placing food on the cooking grid. When a burner is hot, it will vaporize small amounts of grease
that drip on it. Always cover the burners when not in use. Keeping the ceramic portion of the burners free
of foreign substances will allow the gas to circulate and burn over the entire heating surface, allowing for
powerful and even cooking over the life of the burners.
CAUTION
REV 0 - 1412031145
L-C2-451
1 WARNINGS AND SAFETY CODES
3 CAUTION
4 DOUBLE SEARING STATION PARTS LIST
5 COUNTERTOP OVERHANG
5 MODEL SPECIFICATIONS
6 SUBSTRATE
6 DOUBLE SEARING STATION DIMENSIONS TABLE
7 DOUBLE SEARING STATION WIRING DIAGRAM
8 DOUBLE SEARING STATION FLAME PATTERN
8 ELECTRICAL CONNECTIONS
8 MAINTENANCE AND SAFETY INFORMATION
9 INSTALLATION REQUIREMENTS
10 EXHAUST REMOVAL
10 ENSURE PROPER COMBUSTION AIR AND COOLING AIRFLOW
10 GAS-SUPPLY PLUMBING REQUIREMENTS
11 NATURAL GAS INSTALLS
11 PROPANE GAS INSTALLS (HOUSEHOLD & CYLINDER)
11 WHEN A PROPANE CYLINDER IS USED
11 ENCLOSURE REQUIREMENTS
12 COUNTER PREPARATION
12 CONNECT THE GAS SUPPLY
12 INSTALLATION
13 CONNECT TO A POWER SOURCE
14 POWER SUPPLY (MULTIPLE ACCESSORY UNITS)
15 ELECTRICAL SAFETY
16 CONVERTING THE GAS TYPE
17 SAFE USE & MAINTENANCE OF PROPANE GAS CYLINDERS
19 LIGHTING (IGNITION) INSTRUCTIONS
19 SHUTTING OFF THE UNIT
21 INFRARED BURNER OPERATION
22 CARE & CLEANING
23 CHECKING AND CONVERTING THE REGULATOR
24 CONTROL PANEL REMOVAL
25 TROUBLESHOOTING
26 WARRANTY