Installation and Operation

REV 2 - 1406051400
L-C2-387
18
ELECTRICAL
This vent hood will require electrical work, and includes a
power cord. The install will need a dedicated GFI receptacle
installed near the vent hood to allow for the power cord to
be plugged into. The area above the vent hood that the
soffi t / duct cover will enclose is an ideal location (reference
Fig. 18-1).
1. Install GFI receptacle accordingly.
Observe all codes.
2. Plug the power cord into the GFI receptacle.
Note: The power cord must be plugged in when operating
the vent hood.
DUCT COVER / CUSTOM SOFFIT
Note: Some installs may not require a duct cover / soffi t,
as island height & roof height may vary.
Fire Magic offers a duct cover specifi cally designed for your
vent hood. Contact your dealer for ordering information.
Alternatively, a custom soffi t can be constructed for your
setup. Follow the appropriate section for your spacer type.
Fire Magic Duct Cover:
The Fire Magic duct cover comes ready to be installed.
1. Carefully slide the duct cover into the area above the
already installed spacer and vent hood. Ensure the
bottom perimeter of the duct cover rests fl ush with the
spacer and vent hood. See Fig. 18-2.
2. From beneath the vent hood, use a medium Phillips
screwdriver and the 8-32 x 3/8" screws
supplied with
the duct cover to secure it to the vent hood. (The screws
are to be fastened through the pilot holes found on top
of the vent hood and into the duct cover above.) See
Fig. 18-2.
Important: To prevent cross-threading the screws they
should be installed with a manual screwdriver
and a small amount of household grease.
Note: The rear of the duct cover does not need to be
secured to the rear wall.
Important: DO NOT apply sealant to the duct cover as
it must be removable for servicing and for
access to the electrical connection.
INSTALLATION (cont.)
Fig. 18-1 Install GFI receptacle, connect power cord
Install GFI receptacle,
connect power cord
(vent piping
not shown
for clarity)
Fig. 18-2 Install Fire Magic Duct Cover
Duct cover
(Flush)
(transition, vent piping, &
electrical not shown for
clarity)