2016 Spec Sheet

3
12
12
12
12
12
12
12
12
12
A/C430i
19½
A530i
23½
Warming Drawer
• 33830-SW
• 43830-SW
• 53830-SW
†
(shown)
Masonry Drawer
• 33830-S
• 43830-S
• 53830-S
†
(shown)
Single Access Door
w/Tank Tray & Louvers
• 33820-TSL (TSR)
• 43820-TSL (TSR)
• 53820-TSL (TSR) (shown)
Single Access Door
with Dual Drawers
• 33820-SL (SR)
• 43820-SL (SR)
• 53820-SL (SR) (shown)
Double Doors w/Dual
Drawers & Tank Tray
• 33930S-12 (-12T)
• 43930S-12 (-12T)
• 53930S-12 (-12T) (shown)
(-12T) models include louvers
Double Doors
with 2 Dual Drawers
• 33930S-22
• 43930S-22
• 53930S-22
Single Drawer
• 33801
• 43801
• 53801 (shown)
Double Drawer
• 33802
• 43802
• 53802 (shown)
Triple Drawer
• 33803
• 43803
• 53803 (shown)
Access Door
with Double Drawer
• 33810S
• 43810S
(shown)
• 53810S
Access Door w/Double
Drawer & Platter Storage
• 33816S
• 43816S (shown)
• 53816S
Horizontal Single
Access Doors
(A)
Vertical Single
Access Doors
(B)
Double
Access Doors
(C)
12-S1 - Charcoal Built-In Grill
14-S1 - Charcoal Built-In Grill
11-S - Deluxe Built-In Grill
A830i - Combo Grill
• A430i - Built-In Grill
• C430i - Built-In Grill
• A530i - Built-In Grill
(shown)
• A540i - Built-In Grill (shown)
• C540i - Built-In Grill
• A660i - Built-In Grill
• E660i - Built-In Grill
• A790i - Built-In Grill
• E790i - Built-In Grill (shown)
• E1060i - Built-In Grill
26¼
18½
30
20½
26
26
18½
36½
14½
50
23½
23½
23½
A790i
37¾
E790i
37
31¼
32
A/C540i
19½
A660i
23½
25½
19 ½
50¼
17¾
24¾
19¾
32¼
19¾
26¼
h
w
w
w
h
h
31
13
20½
20½
31
13
14½
21
20½
14½
21
20½
30½
21
20½
5¼
20½
14½
14½
15¾
20½
3
SEE NOTE 5
3” clearance required (on
both sides) for access to
battery compartment when
using material that extends
out from island surface.
3”
OUTDOOR KITCHEN CONSIDERATIONS
• Carefully consider grill size & accessories needed
• Combustible construction requires insulating liner
• Select Natural or Propane (LP gas)
• Determine total gas consumption for supply line size
• Accessisrequiredtogasconnectionsandshutovalve
• Plan location of propane tank away from grill and appliances
• Always refer to the installation and operating instructions of your
Fire Magic
®
grill and/or accessories for installation guidelines &
safety warnings before starting your project
• Always check all gas connections for leaks
• Provideventilationinislandforgasvapors.Allowatleast
fourventilationopenings(twoatoorlevelandtwo16”above
oor10in²each)atopposingends/sides
LOCATION
• Identify outdoor area where grill will be installed
• Determinetheutilitiesneeded(gas,water,electricity,drainageetc.)
• Considerelementexposure(sun,winddirection*,weatheretc.)
* Wind blowing into or across the rear oven lid vent can cause poor
performance and/or dangerous overheating. Orient the grill so that
the prevailing wind blows toward the front of the grill.
MATERIALS
•Foundation-concrete
•Base-brick,stone,stucco,concrete
•Countertop-tile,granite,marble,concrete
Grill Hanger Outline
Grill hanger varies in width (2½"-3")
depending on the size & configuration
of the grill.
COUNTER TOP
TOP VIEW
Allow the grill face to sit flush
when installed.
FOR BULL NOSE COUNTER TOP
DETAIL 1
Description
Hood
Open
Hood
Closed
(A) (B)
Echelon E1060i
35⅝” 27”
Echelon E790i
35⅝” 27”
Echelon E660i
35⅝” 27”
Aurora A830i
32¼” 25¼”
Aurora 790i
35⅝” 27”
Aurora A660i
35⅝” 27”
Aurora A540i/Choice C540i
32¼” 25¼”
Aurora A530i
35⅝” 27”
Aurora A430i/Choice C430i
32¼” 25¼”
Deluxe 11-S
29¾” 25⅛”
32”GourmetCharcoal14-S1
31¾” 26½”
26”GourmetCharcoal12-S1
31¾” 26½”
(
)
(
)
SEE
DETAIL 1
Notes
1. There is a hanger on three sides of each grill. You must
allow clearance for the hanger (SEE DETAIL 1).
2. The control panel (face) of the grills is wider than the
cutout width. This conceals the cutout space on the left &
right hand sides.
3. Clearance of 10” on each side of the oven is recommended
for unrestricted operation of lid and rotisserie and at least
3” at the rear ange for ease of maintenance and proper
operation. (18” from combustible surroundings on each
side and rear is required)
4. Insulating liners must be used & are available for
combustible surrounds (See page 6).
5. The rotisserie motor on all models is located on the right
side of the grill. Optional Reverse Brackets are available
to mount rotisserie motor on opposite side. ONLY units
ordered with back burner option come with rotisserie kit
and brackets.