Installation and Operation

9
INSTALLATION REQUIREMENTS
This grill is designed for outdoor use only. DO NOT use this grill
inside a building, garage, enclosed area, or under an unprotected
overhead combustible construction. See the EXHAUST REMOVAL
section on the following page for details on installing under a patio
roof. DO NOT use this grill in or on a recreational vehicle or boat.
Important: The grill is not insulated. Refer to the information
below to ensure all required clearances are met.
The grill must have a minimum clearance of 18" from
combustible materials/items AT ALL TIMES.
For the minimum clearances between the grill and any side or rear
walls, your setup must fall within one (or more) of the following:
A. Clearance between grill and combustible wall
• The grill must have a minimum of 18" right, left, and rear
clearance from any combustible wall (see Fig. 9-1).
B. Clearance between grill and strictly non-combustible wall
(i.e. brick wall, see Fig. 9-2)
• The grill must have a minimum of 4" right, left, and rear
clearance from any non-combustible wall.
(To allow for proper ventilation and prevent dangerous
overheating.)
MODEL SPECIFICATIONS (cont.)
REV 8 - 1401211520
L-C2-275
STAND-ALONE GRILL DIMENSIONS TABLE
Table 1 A430s A530s A540s A660s
Main burner BTU
N/P orifi ce drill size
25,000 x 2
#42/#54
30,000 x 2
#40/#53
20,000 x 3
#44/#55
25,000 x 3
#42/#54
Backburner BTU
N/P orifi ce drill size
12,500
#52/#59
12,500
#52/#59
17,500
#49/#57
17,500
#49/#57
Sideburner BTU
N/P orifi ce drill size
15,000
#50/#58
15,000
#50/#58
15,000
#50/#58
15,000
#50/#58
Infrared searing burner BTU
N/P orifi ce drill size
16,500
#49/#56
24,000
#45/#55
16,500
#49/#56
24,000
#45/#55
Power supply rating 120VAC / 0.5A / 60 Hz
Oven lights rating
12V / 10 watt halogen bulb
Fig. 9-1 Clearance 'A' Diagram
Combustible
Min.
18"
(Clearance required
for right, left, and rear)
Fig. 9-2 Clearance 'B' Diagram
Non-combustible
Min.
4"
(Clearance required for
right, left, and rear)