Installation Instructions

43
6. If an orifi ce change is necessary, replace the
orifi ce with the correct sized one.
7. Replace the sideburner tube over the orifi ce,
aligning the burner over the electrode, taking
care not to detach it from the wire.
8. Replace the burner retaining clip (underneath
burner). Replace the burner cap.
9. Repeat steps 3 through 8 for the second burner,
then replace the grid and lid.
Important: If converting the gas type, see the
CHECKING AND CONVERTING
THE REGULATOR section before
replacing the control panel.
10. Once all adjustments are complete; be sure the
unit is off and remove the knobs, then replace
the control panel, bezels, and knobs.
DOUBLE SIDEBURNER