Instructions / Assembly

Contact us for assistance: [phone] | www.wtliving.com 5
ASSEMBLY
1
Align holes in Lid Retainer to interior holes in Lid
.
Slide M6x18 Washer
C
onto M6x15 Screw
A
, then insert
through holes and secure with M6x9 Lock Washer
B
and
M6x15 Nut
A
. Repeat with remaining 2 Lid Retainers.
Tighten hardware.
Hardware Used: 6x M6x15 Screw/Nut,
M6x9 Lock Washer,
M6x18 Washer
2
Align holes in Handle with exterior holes in Lid .
Slide M6x18 Washer
C
onto M6x15 Screw
A
, then insert
through holes and secure with M6x9 Lock Washer
B
and
M6x15 Nut
A
. Tighten hardware.
Hardware Used: 2x M6x15 Screw/Nut,
M6x9 Lock Washer,
M6x18 Washer
PREPARATION
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts are missing,
please contact Customer Service at (866)-985-7877, Monday-Friday, 9 a.m. - 6 p.m. EST or email at [e-mail].
Place all parts on a soft, level surface for assembly. You will need an open-end wrench and Phillips screwdriver for assembly.
1
2