Owner’s Manual Models: 02117/60694/02678 READ & SAVE these instructions Carefully read and review before attempting to assemble, install, operate, or maintain this product. Observe all safety instructions and information. FAILURE TO FOLLOW WARNINGS AND OPERATIONAL INSTRUCTIONS CONTAINED IN THIS MANUAL CAN RESULT IN SEVERE PROPERTY DAMAGE AND OR PERSONAL INJURY.
Safety Guidelines Read this manual carefully to become knowledgeable about your heater and how to use it properly. To help recognize this information, observe the following symbols. Indicates a potentially hazardous situation which, if Indicates a potentially hazardous situation, if not not avoided, WILL result in serious injury or death. avoided, COULD result in serious injury or death.
This appliance MUST be grounded. * When using outdoors, we recommend using a certified GFI (Ground Fault Interrupt) outlet to protect against electrical shock. * All installations must be in accordance with I.E.E. safety regulations or the equivalent. * Avoid the use of an extension cord with this appliance. * Do not place any objects such as furniture, papers, clothing or curtains closer than 3 feet to the front and sides of the heater.
Important Instructions 1. Read all instructions before using this heater. 11. Do not insert or allow foreign objects to enter any ventilation or exhaust opening; doing so may cause an electrical shock or fire, or may damage the heater. 2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers cloths, and curtains at least 3 feet (0.9m) from the front, sides and rear of the heater. 12.
Assembling Your Heater Before beginning assembly, be sure to read and familiarize yourself with the overall assembly process and instructions in this manual. It may be helpful to have someone assist you with the assembly. You will need the following tools (NOT INCLUDED): ** #2 or #3 Philips Screwdriver (or standard slotted screwdriver) ** Adjustable Wrench. Make sure you complete assembly on a clean, level, preferably carpeted location. A flat piece of cardboard will also work for assembly.
STEP 2 Using mounting bracket (Part 2), thread entire electrical cord through the mounting bracket as shown in Figure 3. FIGURE 3 STEP 3 Using 4 threaded bolts, attach mounting bracket (Part 2) to head unit (Part 1) as shown in Figure 4. FIGURE 4 STEP 4 Align tilt switch (black box on head unit, Part 1) to threaded holes on mounting bracket (Part 2) and insert small screws with flat washers as shown in Figure 5.
STEP 5 Thread electrical cord through curved upper arm (Part 3) and attach with 4 threaded bolts as shown in Figure 6. FIGURE 6 STEP 6 Insert inner support tube (Part 4) inside telescopic body (Part 5) as shown in Figure 7. Tighten clamp collar as shown in Figure 8. FIGURE 7 FIGURE 8 STEP 7 Thread electrical cord through inner support tube and telescopic body as shown in Figure 9 and affix curved upper arm and inner support tube with one threaded bolt as shown in Figure 10.
STEP 8 Thread electrical cord through base connection pole section (Part 6) and insert 4 threaded bolts as shown in Figure11, 12 and 13. FIGURE 11 FIGURE 12 FIGURE 13 STEP 9 Mount support collar flange (Part 7) to base assembly with wheels (Part 8) as shown in Figure 14, and secure with flat washer, lock washer, and ¾” bolt as shown in Figure 15. FIGURE 14 FIGURE 15 STEP 10 Carefully lift pole and head unit assembly and insert lower end of pole into support collar flange (Part 7) as shown in Figure 16.
CAUTION! OPERATING INSTRUCTIONS This appliance MUST be grounded. * When using outdoors, we recommend using a certified GFI (Ground Fault Interrupt) outlet to protect against electrical shock. * ALL installations must be in accordance with I.E.E. safety regulations or equivalent. * Avoid the use of an extension cord with this appliance. If one is used, it must meet the requirements as outlined in #15, “Important Instructions” on page 4 of this manual.
Specifications Model: Voltage: Amps: Wattage: Lamp Type: Minimum Operational Height: Assembled Weight: Head Unit Dimensions: Heater Assembled Dimensions: 02117/60694/02678 120 volts 12.5 amps 1500 watts Quartz Halogen 8 ft., 2 in. (98 in.) 53 lbs. 4.5” x 7” x 22” 22” diameter base, 96” height (02117/60694) and 93" (02678) Storage * Always UNPLUG the unit when not in use. * Once the head unit has completely cooled, store the heater with the protective vinyl cover on the head unit.
Halogen Lamp Replacement Contact the toll free customer hotline to order approved replacement lamps and parts. Use ONLY approved original equipment and replacement halogen lamps to ensure safe, proper and maximum output operation of your heater. NOTE: Do NOT touch the new halogen lamp with your bare fingers. Oils from your hand could reduce the life of the lamp by causing a heat spot. We recommend using clean cotton or plastic gloves to handle the lamp. A clean paper towel will also work.
Troubleshooting Problem Unit fails to turn on. Solution Check electrical plug connection at wall outlet for a complete, snug fit. Check to make sure the “On/Off” switch located on tilt switch is pulled OUT or in the “On” position. Check GFI and reset circuit breaker if needed. If unit is plugged into a wall outlet wired to an On/Off switch, make sure switch is in On Position. Reset safety tilt switch. Unplug unit from wall outlet and re-position on flat, level surface. Plug heater back into outlet.
Distributed By: Well Traveled Living 716 S 8th Street Amelia Island, FL 32034 Toll Free: 866‐WTL‐SUPP Web: www.wtliving.com Email: cservice@welltraveled.net 1 YEAR LIMITED WARRANTY – Customers in the Continental US All components are warranted for a period of 1 year after date of purchase by the original owner against defects in materials and workmanship under normal use. This warranty does NOT cover normal wear and weathering, assembly and/or maintenance OR use in a commercial application.